7
NXDN™ OPERATION
7-3
Setting a call type
Set the call type to display the entered IDs on the
Menu screen. Settable call types are “GROUP”
(Talkgroup) or “IND” (Individual).
<Key operation>
Using [Individual]:
Push [Individual] to set the call type to “Individual,”
then enter the Application Selection mode.
•
“INDIVIDUAL” is briefly displayed, then “VOICE” is
displayed.
Using [Talkgroup]:
Push [Talkgroup] to set the call type to “Talkgroup,”
then enter the Application Selection mode.
•
“TALKGROUP” is briefly displayed, then “VOICE” is
displayed.
Using [Digital Button]:
Hold down [Digital Button] for 1 second to switch the
call type between “Individual” and “Talkgroup,” then
enter the Application Selection mode.
•
“INDIVIDUAL” or “TALKGROUP” is briefly displayed, then
“VOICE” is displayed.
<Menu operation>
TIP:
The Portable type transceiver’s operations are
described in
red
. And the Mobile type transceiver’s
operations are described in
blue
.
L
The common operations are in black.
(MENU > CONTACT >
CALL TYPE
)
1. Push [Menu] to display the Menu screen.
•“CONTACT” is selected.
2. Push
[P1](ENT)
or
[P2]
.
•
The current call type is briefly displayed, then the
Contact menu screen is displayed.
3. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “CALL TYPE.”
Portable
CONTACT
CALL TYPE
ENT
BACK
Mobile
C O N T A C T
C A L L
T Y P E
4. Push
[P1](ENT)
or
[P2]
.
•Enters the Call Type Selection mode.
5. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to set
the call type to “GROUP” (Talkgroup) or “IND”
(Individual).
•GROUP: Displays only the Talkgroup IDs.
•IND:
Displays only the Individual IDs.
6. Push
[P1](OK)
or
[P2]
to set the selected call type.
L
Push
[P0](CANC)
or
[P1]
to cancel, and return to the
previous screen.
7. Push
[P0](BACK)
or
[P1]
several times until you
return to the Standby mode.
NOTE:
If the call type is “Talkgroup,” the Status
Polling call, Radio Check call, Remote Monitor call,
and the command (Stun/Revive/Kill) cannot be sent.
Previous view
