6
SCAN OPERATION
6-4
Selecting a Scan list
You can select a Scan list to be scanned.
Channels included in the selected Scan list are
scanned during a scan.
When selecting a zone type Scan list, the channels
that are in the same zone as the Scan start channel
will be scanned.
<Key operation>
1. Hold down [Scan Start/Stop] for 1 second to
display the scan list.
Portable
SCAN1
MENU SCAN SCAD LONE
SCAD
Mobile
S C A N 1
2. Push [CH Up] or [CH Down] to select a list, then
push [Scan Start/Stop] again to save, and return
to the Standby mode.
Portable
SCAN2
MENU SCAN SCAD LONE
SCAD
Mobile
S C A N 2
<Menu operation>
TIP:
The Portable type transceiver’s operations are
described in
red
. And the Mobile type transceiver’s
operations are described in
blue
.
L
The common operations are in black.
(MENU > SCAN >
SELECT
)
1. Push [Menu] to display the Menu screen.
2. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “SCAN,” and then push
[P1](ENT)
or
[P2]
.
Portable
ENT
BACK
SCAN
Mobile
M E N U
S C A N
3. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “SELECT,” and then push
[P1](ENT)
or
[P2]
.
Portable
SCAN
SELECT
ENT
BACK
Mobile
S C A N
S E L E C T
•Displays the Scan list.
☞
Continued on the next page.
Previous view
