Icom ID-52A, Основное руководство

Страница: 28 / 88

3
BASIC OPERATION
15
BASIC MANUAL
■
Selecting the operating band
1. Push [VFO/MHz] to select the VFO mode.
2. Push [QUICK].
3. Select “Band Select.”
4. Select the desired frequency band.
•Sets the operating band, then returns to the standby
screen.
L
Selectable frequency bands differ, depending on the
transceiver version. See the specifications for details.
(p. 34)
■
Selecting the operating mode
The transceiver has 5 operating modes, FM, FM-N, AM,
AM-N, and DV.
Push [MODE] to select the operating mode.
L
Information
•In the FM-N mode, the TX modulation is automatically set to
narrow (approximately ±2.5 kHz).
•The AM-N mode can be used for only 108.000 MHz ~
143.995 MHz.
•On 108.000 MHz ~ 136.991 MHz, you can use only AM or
AM-N.
•On the Ham band, you can use only FM, FM-N, or DV.
•When the GPS TX mode is selected in the DV mode, is
displayed.
([MENU] > GPS >
GPS TX Mode
)
TIP: You can make a simplex call not only in the FM
mode but also in the DV mode.
FM mode
Transmit and receive Receive only