Icom ID-52A Скачать руководство пользователя

Страница: 19 / 88

INITIAL SETUP

BASIC MANUAL

■

Charging the battery pack

Capacity of the battery pack

ICON

BATTERY STATUS

The battery has sufficient capacity.

The battery is exhausted a little.
The battery is nearing exhaustion.

Blinking The battery is almost fully exhausted.

NOTE:

•

Prior to using the transceiver for the first time, the battery pack must be fully charged for

optimum life and operation.

•

BE SURE

to turn OFF the transceiver while charging with the supplied battery charger.

Otherwise, the attached battery pack cannot be charged.

•While charging, the charging icon “

” and “Charging....” are displayed.

•The icon and “Charging....” disappear when the battery pack is fully charged.

NOTE: BE SURE

to attach the battery

pack before connecting the Battery

charger.

To [DC IN]

To an AC outlet

BP-271

(Supplied)

BC-167S

The shape is different and supplied or

optional, depending on the charger version.

Turn OFF

Charging time:

Approximately 3 hours

(When charging the BC-271 with the BC-167S)

See the Advanced manual about the optional battery packs and chargers.

Содержание ID-52A

























































































Результаты поиска

Содержание ID-52A

Отзывы:

Похожие инструкции для ID-52A

Бренды по названию

Популярные бренды

Icom ID-52A, Основное руководство

Результаты поиска

Содержание ID-52A

Отзывы:

Похожие инструкции для ID-52A

Бренды по названию

Популярные бренды