Icom ID-51A Скачать руководство пользователя страница 375

Страница: 375 / 413

OTHER FUNCTIONS

17-21

“CLONE” screen

“CLONE-OUT” screen
(While sending data)

Return to the
“CLONE” screen

•

Connections

Master transceiver

(sends the cloning data)

Sub transceiver

(receives the cloning data)

•

Screen of the master transceiver

■

Cloning function (Continued)

Transceiver-to-Transceiver cloning using a cable

Connects two transceivers (master and sub transceiv-
er) using a stereo audio cable (purchase separately).
Use the stereo audio cable (3.5 (d) mm;

⁄

″

), purchase

separately.

* Depending on the stereo audio cable, it may not be used for

cloning.

1. Transceiver connection

Hold down [ ] to turn OFF the both master and sub
transceivers.

Connect a stereo audio cable between master and
sub transceiver, as shown to the right.

Hold down [ ] to turn ON the both master and sub
transceivers.

2. Setting the Sub transceiver

On the sub transceiver, push [MENU]

Push D-pad(



) to select the root item (“Others”),

and then push D-pad(Ent) to go to the next screen.

Push D-pad(



) to select “Clone,” and then push D-

pad(Ent).

Push D-pad(



) to select “Clone Mode,” and then

push D-pad(Ent).

• “Go to the Clone Mode?” appears.

Push D-pad(



) to select “Yes,” and then push D-

pad(Ent).

• The clone mode screen appears.

3. Setting the Master transceiver

On the master transceiver, push [MENU]

Push D-pad(



) to select the root item (“Others”),

and then push D-pad(Ent) to go to the next screen.

Push D-pad(



) to select “Clone,” and then push D-

pad(Ent).

Push D-pad(



) to select “Clone Master Mode,” and

then push D-pad(Ent).

• “Go to the Clone Master Mode?” appears.

Push D-pad(



) to select “Yes,” and then push D-

pad(Ent).

• The clone master mode screen appears.

Push [PTT] on the master transceiver.

•

On the sub transceiver, the “CLONE-IN” screen ap-
pears.

• On the master transceiver, the “CLONE-OUT” screen ap-

pears.

When cloning is completed, the master transceiver

returns to the clone master mode screen.

• The sub transceiver displays the “CLONE End” screen.
• If you have another transceiver to clone, connect it and

then push [PTT] of the master transceiver.

Reboot the sub transceiver to enable the cloned set-

tings.

to [SP] jack

3.5 mm (d);

⁄

″

Stereo plug

• Stereo plug (purchase locally)

Less than 4.5 mm; 0.17

″

Previous view

Содержание ID-51A






























































































































































































































































































































































































































Результаты поиска

Содержание ID-51A

Отзывы:

Похожие инструкции для ID-51A

Бренды по названию

Популярные бренды

Icom ID-51A, Руководство для продвинутых пользователей

Результаты поиска

Содержание ID-51A

Отзывы:

Похожие инструкции для ID-51A

Бренды по названию

Популярные бренды