manualshive.com logo in svg

Icom ID-51A, Руководство для продвинутых пользователей

Icom ID-51A - продвинутый ручной рацион, предоставляющий пользователю широкий спектр функций. Бесплатно скачайте Руководство по эксплуатации на manualshive.com для раскрытия всех возможностей этого устройства. Узнайте, как использовать его в полной мере и наслаждайтесь коммуникацией на новом уровне.

Поделиться
Скачать
background image

i

INTRODUCTION

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the 
United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United 
States and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.

About these Advanced Manual (PDF format)

These Advanced Manual describe the details of the ID-51A/E features. This PDF formatted manual provides you 
with convenient functions, as follows.

15

REPEATER AND DUPLEX OPERATIONS

15-4

 Duplex operation

The  Duplex  operation  shifts  the  transmit  frequency 
up  or  down  from  the  receive  frequency  by  an  offset 
amount.

 

D

Setting the frequency offset

 

q

Push [V/MHz]

 to select the VFO mode.

 

w

Push [MENU]

.

 

e

 Push  D-pad(

)  to  select  the  root  item  (“DUP/

TONE...”), and then push D-pad(Ent).

D-pad

( )

(Ent)

 

r

 Push D-pad(

) to select the “Offset Freq,” and then 

push D-pad(Ent).

 

t

 Rotate  [DIAL]  to  set  the  frequency  offset  to  be-
tween 0.000.00 and 59.99500 MHz, and then push  
D-pad(Ent).  

(Setting example: 1.000.00 MHz)

  •  The selected tuning step in the VFO mode is used when 

setting the frequency offset.

  •  Pushing [V/MHz]

 toggles the tuning digit, as shown 

below. 

  

 

TS*

1 MHz

10 MHz

  

 * The frequency changes according to the preset tuning 

steps. (p. 5-8)

 

y

 Push [MENU]

 to exit the [MENU] screen.

To reset to the default value.
Push [QUICK]

 in step 

t

 as described above, then 

push D-pad(Ent) to reset to the default value.

The current frequency 
offset

Rotate [DIAL], then 
push D-pad(Ent).

Push [QUICK]

Push D-pad(Ent)

[DIAL]

The current frequency 
offset

NOTE:
•  The frequency offset cannot be changed while using 

the DR function.

•  

-

cy offset. Depending on the frequency offset value, 
the off band indication, “OFF,” appears on the display 
when [PTT] is pushed. (p. 15-5)

Previous view

The Auto repeater function uses the preset frequen

Example:  When the cursor is moved over 

[V/MHz]

  in the description, a 

red circle appears around the ap-
propriate key(s).

(p. 15-5)

Move to the page, if clicked.

The screen shots at the right column, correspond 
to the operating instructions and procedures 
shows both setting and operating example.

15

REPEATER AND DUPLEX OPERATIONS

15-4

 Duplex operation

The  Duplex  operation  shifts  the  transmit  frequency 
up  or  down  from  the  receive  frequency  by  an  offset 
amount.

 

D

Setting the frequency offset

 

q

Push [V/MHz]

 to select the VFO mode.

 

w

Push [MENU]

.

 

e

 Push  D-pad(

)  to  select  the  root  item  (“DUP/

TONE...”), and then push D-pad(Ent).

D-pad

( )

(Ent)

 

r

 Push D-pad(

) to select the “Offset Freq,” and then 

push D-pad(Ent).

 

t

 Rotate  [DIAL]  to  set  the  frequency  offset  to  be-
tween 0.000.00 and 59.99500 MHz, and then push  
D-pad(Ent).  

(Setting example: 1.000.00 MHz)

  •  The selected tuning step in the VFO mode is used when 

setting the frequency offset.

  •  Pushing [V/MHz]

 toggles the tuning digit, as shown 

below. 

  

 

TS*

1 MHz

10 MHz

  

 * The frequency changes according to the preset tuning 

steps. (p. 5-8)

 

y

 Push [MENU]

 to exit the [MENU] screen.

To reset to the default value.
Push [QUICK]

 in step 

t

 as described above, then 

push D-pad(Ent) to reset to the default value.

The current frequency 
offset

Rotate [DIAL], then 
push D-pad(Ent).

Push [QUICK]

Push D-pad(Ent)

[DIAL]

The current frequency 
offset

NOTE:
•  The frequency offset cannot be changed while using 

the DR function.

•  

-

cy offset. Depending on the frequency offset value, 
the off band indication, “OFF,” appears on the display 
when [PTT] is pushed. (p. 15-5)

Previous view

The Auto repeater function uses the preset frequen

Shows a term description

When the mouse cursor is moved over a term which 
is highlighted in yellow, the description of the term is 
displayed.

15

REPEATER AND DUPLEX OPERATIONS

15-4

 Duplex operation

The  Duplex  operation  shifts  the  transmit  frequency 
up  or  down  from  the  receive  frequency  by  an  offset 
amount.

 

D

Setting the frequency offset

 

q

Push [V/MHz]

 to select the VFO mode.

 

w

Push [MENU]

.

 

e

 Push  D-pad(

)  to  select  the  root  item  (“DUP/

TONE...”), and then push D-pad(Ent).

D-pad

( )

(Ent)

 

r

 Push D-pad(

) to select the “Offset Freq,” and then 

push D-pad(Ent).

 

t

 Rotate  [DIAL]  to  set  the  frequency  offset  to  be-
tween 0.000.00 and 59.99500 MHz, and then push  
D-pad(Ent).  

(Setting example: 1.000.00 MHz)

  •  The selected tuning step in the VFO mode is used when 

setting the frequency offset.

  •  Pushing [V/MHz]

 toggles the tuning digit, as shown 

below. 

  

 

TS*

1 MHz

10 MHz

  

 * The frequency changes according to the preset tuning 

steps. (p. 5-8)

 

y

 Push [MENU]

 to exit the [MENU] screen.

To reset to the default value.
Push [QUICK]

 in step 

t

 as described above, then 

push D-pad(Ent) to reset to the default value.

The current frequency 
offset

Rotate [DIAL], then 
push D-pad(Ent).

Push [QUICK]

Push D-pad(Ent)

[DIAL]

The current frequency 
offset

NOTE:
•  The frequency offset cannot be changed while using 

the DR function.

•  

-

cy offset. Depending on the frequency offset value, 
the off band indication, “OFF,” appears on the display 
when [PTT] is pushed. (p. 15-5)

Previous view

The Auto repeater function uses the preset frequen

Move to the previously read page.

Click 

Previous view

 at the left top on an 

each page, to move back to the previ-
ously read page.

Shows the location of keys

When the cursor is moved over a term with a red 
underline, a red circle appears around the appro-
priate key(s) on the illustration of the transceiver.

15

REPEATER AND DUPLEX OPERATIONS

15-4

 Duplex operation

The  Duplex  operation  shifts  the  transmit  frequency 
up  or  down  from  the  receive  frequency  by  an  offset 
amount.

 

D

Setting the frequency offset

 

q

Push [V/MHz]

 to select the VFO mode.

 

w

Push [MENU]

.

 

e

 Push  D-pad(

)  to  select  the  root  item  (“DUP/

TONE...”), and then push D-pad(Ent).

D-pad

( )

(Ent)

 

r

 Push D-pad(

) to select the “Offset Freq,” and then 

push D-pad(Ent).

 

t

 Rotate  [DIAL]  to  set  the  frequency  offset  to  be-
tween 0.000.00 and 59.99500 MHz, and then push  
D-pad(Ent).  

(Setting example: 1.000.00 MHz)

  •  The selected tuning step in the VFO mode is used when 

setting the frequency offset.

  •  Pushing [V/MHz]

 toggles the tuning digit, as shown 

below. 

  

 

TS*

1 MHz

10 MHz

  

 * The frequency changes according to the preset tuning 

steps. (p. 5-8)

 

y

 Push [MENU]

 to exit the [MENU] screen.

To reset to the default value.
Push [QUICK]

 in step 

t

 as described above, then 

push D-pad(Ent) to reset to the default value.

The current frequency 
offset

Rotate [DIAL], then 
push D-pad(Ent).

Push [QUICK]

Push D-pad(Ent)

[DIAL]

The current frequency 
offset

NOTE:
•  The frequency offset cannot be changed while using 

the DR function.

•  

-

cy offset. Depending on the frequency offset value, 
the off band indication, “OFF,” appears on the display 
when [PTT] is pushed. (p. 15-5)

Previous view

The Auto repeater function uses the preset frequen

Previous view

Содержание ID-51A






























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ID-51A

Harris Ranger Series Commissioning Manual preview
Ranger Series
Бренд: Harris Страницы: 162
Harman Kardon AVR 245 Quick Start Manual preview
AVR 245
Бренд: Harman Kardon Страницы: 2
Harman Kardon DPR 1001 Owner'S Manual preview
DPR 1001
Бренд: Harman Kardon Страницы: 44
Harman Kardon AVR 325 Service Manual preview
AVR 325
Бренд: Harman Kardon Страницы: 176
Harman Kardon AVR 247 Worksheet preview
AVR 247
Бренд: Harman Kardon Страницы: 3
Xoro HRT 7622 User Manual preview
HRT 7622
Бренд: Xoro Страницы: 44
Yaesu FTM-100DE Instruction Manual preview
FTM-100DE
Бренд: Yaesu Страницы: 15
Yaesu FT-891 Technical Supplement preview
FT-891
Бренд: Yaesu Страницы: 99
Yaesu FT-891 Reference Book preview
FT-891
Бренд: Yaesu Страницы: 20
Yaesu FTM-100DR Operating Manual preview
FTM-100DR
Бренд: Yaesu Страницы: 176
emitor Satlook Micro G2 User Manual preview
Satlook Micro G2
Бренд: emitor Страницы: 24
D+M Group AVR-X4200W Instructions Manual preview
AVR-X4200W
Бренд: D+M Group Страницы: 24
RocketFish RF-WHD210 (French) Manual D'Installation Rapide preview
RF-WHD210
Бренд: RocketFish Страницы: 2
Jensen CDR171 Installation & Owner'S Manual preview
CDR171
Бренд: Jensen Страницы: 28
Dual XDVD251BT Installation & Owner'S Manual preview
XDVD251BT
Бренд: Dual Страницы: 33
Lotek Wireless SRX 400 User Manual preview
SRX 400
Бренд: Lotek Wireless Страницы: 36
DRAKE T-4XC Instruction Manual preview
T-4XC
Бренд: DRAKE Страницы: 48
AES Corporation IntelliNet 7705ii User Manual preview
IntelliNet 7705ii
Бренд: AES Corporation Страницы: 111

Бренды по названию

Популярные бренды

Загрузить еще бренды