Icom ID-51A Скачать руководство пользователя страница 19

Страница: 19 / 413

USING A microSD CARD

2-13

■

Backing up the data stored on the microSD card onto a PC (Continued)

Making a backup file on your PC

Windows 7 is used for these instructions.

Insert the microSD card into the microSD card drive
on your PC.

• If no microSD card drive is built-in, connect a memory

card reader (purchase separately) and then insert the
microSD card into it.

Click the “Open folder to view files” option to access
the card.

Select “Removable disk” and then right click.

Click “Copy.”

Open the desired folder to copy to, then right click,
and then click “Paste” to copy the data that is in the
microSD card onto the hard disk.

(

Example:

Copying into the “Backup” folder in C
drive)

When removing the microSD card from the PC, click
the microSD card icon in the task bar. (“ ” icon in
the screen shot as shown to the right.)

• The screen shot shows when a memory card reader is

connected.

Remove the microSD card from the PC when “Safe
To Remove Hardware” appears.

• The screen shot shows when a memory card reader is

connected.

Right click

Click

Previous view

Содержание ID-51A






























































































































































































































































































































































































































Результаты поиска

Содержание ID-51A

Отзывы:

Похожие инструкции для ID-51A

Бренды по названию

Популярные бренды

Icom ID-51A, Руководство для продвинутых пользователей

Результаты поиска

Содержание ID-51A

Отзывы:

Похожие инструкции для ID-51A

Бренды по названию

Популярные бренды