2
USING A microSD CARD
2-8
q
Push [MENU]
.
w
Push D-pad(
) to select the root item (“SD Card”),
and then push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select “Save Setting,” and then
push D-pad(Ent).
r
Push D-pad(
) to select “<<New File>>,” and then
push D-pad(Ent).
• The FILE NAME screen is displayed.
t
Push [CLR]
to delete the previously entered
character.
• Push [CLR]
to delete the selected character, symbol
or number.
When the cursor does not select a character, the previ-
ous character is deleted.
If [CLR]
is held down, all the characters are delet-
ed.
y
Rotate [DIAL] to select a desired character.
• The selected character blinks.
■
Saving with a different file name
Input mode selection window
About text entry
• Push D-pad(
) to move the cursor forward or backward.
• While selecting a character, push [QUICK]
to change
the character to a upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the in-
put mode selection window.
- Push D-pad(
) to select the desired upper case letter,
lower case letter, number or symbol.
- To enter symbols, select “!”#,” and then push D-pad(Ent)
to open the symbol character selection window. Rotate
[DIAL] to select the desired symbol character, and then
push D-pad(Ent).
• Move the cursor, then rotate [DIAL] to insert a character.
• A space can be selected in any input mode.
• Push D-pad(
) to enter a space.
• If you make a mistake, push [CLR]
to delete the se-
lected character, or hold down [CLR] to continuously erase
the characters, first to the right, and then to the left of the
cursor.
☞
Continued on the next page
Previous view
