9
D-STAR OPERATION <ADVANCED>
9-25
■
Entering information into Repeater List (Continued)
D
New repeater entry
1. Selecting the repeater group
q
Push [MENU]
.
w
Push D-pad(
) to select the root item (“DV Memo-
ry”), and then push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select “Repeater List,” and then
push D-pad(Ent).
• The repeater groups are displayed.
r
Push D-pad(
) to select the desired repeater group,
and then push D-pad(Ent).
• The Repeater List of the selected repeater group is dis-
played.
t
Push [QUICK]
.
y
Push D-pad(
) to select “Add,” and then push D-
pad(Ent).
• The REPEATER LIST EDIT screen is displayed.
☞
Continued on the next page.
* When you want to add a new repeater by editing a repeater
memory contents, select “Edit.” In this case, after editing, be
sure to select “<<Add Write>>.” If you select “<<Overwrite>>,”
the original repeater entered contents are overwritten.
Select
*
2. Selecting the communication type
u
Push D-pad(
) to select “TYPE,” and then push D-
pad(Ent) to enter the communication type selection
mode.
D-pad
(
)
(Ent)
i
Push D-pad(
) to select the communication type.
• DV Repeater: Repeater operation in the DV mode.
• DV Simplex: Simplex operation in the DV mode.
• FM Repeater: Repeater operation in the FM mode.
• FM Simplex: Simplex operation in the FM mode.
o
After setting, push D-pad(Ent).
Previous view
