Icom ID-5100A, Основное руководство

Страница: 68 / 108

New2001
55
New2001 New2001
RECORDING A QSO ONTO AN SD CARD
5
■
About the SD card
The SD and SDHC cards are not available from Icom. Pur-
chase separately.
An SD card of up to 2 GB, or an SDHC of up to 32 GB, can
be used with the ID-5100A/E.
Icom has checked the compatibility with the following SD and
SDHC cards.
(As of March 2014)
Brand Type Memory size
SanDisk
®
SD 2 GB
SDHC
4 GB
8 GB
16 GB
32 GB
• The above list does not guarantee the card’s performance.
• Throughout the rest of this document, the SD card and an
SDHC card are simply called SD cards.
• Icom recommends that you format all SD cards to be used
with the transceiver, even preformatted SD cards for PCs or
other uses.
Saving the factory default data is recommended. Insert the
card into the transceiver’s slot, and then touch [MENU].
Touch “SD Card,” and then “Save Setting” to save.
NOTE:
• Before using the SD card, read the instructions of the SD
card thoroughly.
• If you do any of the following, the SD card data may be
corrupted or deleted.
- You remove the SD card from the transceiver while ac-
cessing the SD card.
- You change the external power supply’s voltage while
accessing the SD card.
- You start the vehicle engine while accessing the SD
card.
- You drop, impact or vibrate the SD card.
• Do not touch the contacts of the SD card.
• The transceiver takes a longer time to recognize a high
capacity SD card.
• The SD card will get warm if used continuously for a long
period of time.
• The SD card has a certain lifetime, so data reading or writ-
ing may not be possible after using it for a long time pe-
riod.
• When reading or writing data is impossible, the SD card’s
lifetime has ended. In this case, purchase a new one. We
recommend you make a backup file of the important data
onto your PC.
• Icom will not be responsible for any damage caused by
data corruption of an SD card.