Icom ID-50A Скачать руководство пользователя страница 8

Страница: 8 / 88

vii

BASIC MANUAL

■

Precautions

DANGER! NEVER

operate the

transceiver near unshielded electrical

blasting caps or in an explosive

atmosphere. This could cause an explosion

and death.

DANGER! NEVER

use Icom battery

packs with non-Icom transceivers. Only

Icom battery packs are tested and

approved for use with Icom transceivers.

Using third-party or counterfeit battery

packs may cause smoke, fire, or cause the

battery to burst.

WARNING RF EXPOSURE!

This

transceiver emits Radio Frequency

(RF) energy. Extreme caution should be

observed when operating this transceiver.

If you have any questions regarding RF

exposure and safety standards, please

refer to the Federal Communications

Commission Office of Engineering

and Technology’s report on Evaluating

Compliance with FCC Guidelines for

Human Radio Frequency Electromagnetic

Fields (OET Bulletin 65).

WARNING! NEVER

hold the

transceiver so that the antenna is very

close to, or touching exposed parts of the

body, especially the face or eyes, while

transmitting.

WARNING! NEVER

operate or touch

the transceiver with wet hands. This could

cause an electric shock or damage the

transceiver.

WARNING! NEVER

operate the

transceiver with earphones, a headset, or

other audio accessories at high volume

levels. If you experience a ringing in your

ears, reduce the volume or discontinue

use.

CAUTION: DO NOT

short the terminals of

the battery pack. Shorting may occur if the

terminals touch metal objects such as a

key, so be careful when placing the battery

packs (or the transceiver) in bags, and so

on. Carry them so that shorting cannot

occur with metal objects. Shorting may

damage not only the battery pack but also

the transceiver.

■

Voice Coding Technology

The AMBE+2™ voice coding Technology

embodied in this product is protected by

intellectual property rights including patent

rights, copyrights and trade secrets of Digital

Voice Systems, Inc. This voice coding

Technology is licensed solely for use within

this Communications Equipment.

The user of this Technology is explicitly

prohibited from attempting to extract, remove,

decompile, reverse engineer, or disassemble

the Object Code, or in any other way convert

the Object Code into a human-readable form.

U.S. Patent Nos.

#8,359,197 and #7,970,606.

This product includes “mbed TLS” open

source software, and is licensed according

to the open source software license.
Refer to the “About the Licenses” page

at the end of the manual in English for

information on the open source software

being used in this product.

■

Trademarks

Icom and the Icom logo are registered

trademarks of Icom Incorporated (Japan) in

Japan, the United States, the United Kingdom,

Germany, France, Spain, Russia, Australia,

New Zealand, and/or other countries.

Adobe, Acrobat, and Reader are either

registered trademarks or trademarks of Adobe

Systems Incorporated in the United States

and/or other countries.

AMBE+2 is a trademark and property of

Digital Voice Systems Inc.

All other products or brands are registered

trademarks or trademarks of their respective

holders.

Содержание ID-50A

























































































Результаты поиска

Содержание ID-50A

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-50A, Основное руководство

Результаты поиска

Содержание ID-50A

Отзывы:

Бренды по названию

Популярные бренды