5
GPS OPERATION
5-32
GPS Logger function
D
The <<
GPS Logger Only>> mode
The transceiver has the exclusive GPS Logger mode
where only the GPS Logger functions.
This mode is useful when you are traveling and do not
want to use the transceiver for communication, but
you do want to use just the GPS Logger.
NOTE:
In the “GPS Logger Only” mode, the GPS
Logger function is ON, but the transceiver function
is disabled, until you reboot the transceiver.
D
<<GPS Logger Only>> outline
1�
Insert the microSD card*.
* User supplied.
2�
Confirm that the GPS receiver is receiving your
position and time. (p. 5-3)
3�
Confirm that the GPS Logger function is ON.
(p. 5-28)
4�
Turn ON the <<GPS Logger Only>> mode.
Completed!
You can start using the <<GPS Logger Only>> mode.
D
Setting the <<GPS Logger Only>> mode
1�
Push [QUICK].
microSD card is
inserted.
↓
The GPS icon is
displayed.
↓
2�
Select <<GPS Logger Only>>.
▼
• “Only GPS Logger is now functioning.” is displayed.
L
You can also set the <<GPS Logger Only>> mode on
the MENU screen.
TIP: To cancel the <<GPS Logger Only>> mode
Turn OFF the transceiver then ON again.
L
When the transceiver is tuned ON again, the normal
GPS Logger function is still ON.
The <<GPS Logger Only>> mode screen
←Latitude
Compass
direction:
Heading Up
←Longitude
←Altitude
←Speed
↑
Your course is indicated in degrees.
North is 0° so you are now heading
to South.
TIP:
When
GPS Logger
is set to “OFF,” the
following dialog is displayed.
(MENU > GPS > GPS Logger >
GPS Logger
)
To use the <<GPS Logger Only>> mode, select
<YES>.
TIP:
You can change the GPS Information, Grid
Locator Display, or Compass Direction settings.
In the <<GPS Logger Only>> mode, push [QUICK]
to open the Quick Menu window.
Select a setting item you want to change.
