Icom ID-31A PLUS Скачать руководство пользователя страница 77

Страница: 77 / 227

GPS OPERATION

5-10

This screen is used to view GPS satellite information

when the GPS icon does not stop blinking for a long

time.

The GPS Information displays the quantity, signal

power, and position of the GPS satellites.

The sky view screen displays the position of GPS

satellites. The screen also displays the direction,

elevation angle, satellite numbers, and their receiving

signal strength status.

1�

Push [QUICK].

2�

Select “GPS Information.”

• Displays the GPS INFORMATION screen.

3�

Push [CLR].

• Returns to the standby screen.

Elevation angle

0 degree line

Elevation angle

30 degree line

Elevation angle

60 degree line

Elevation angle 90

degree line (Zenith)

Satellite

number 15

The image of satellite number 15

Checking GPS information (Sky view screen)

Meaning of each icon

• (



Untracking satellite.

• (01):

Tracking satellite with a weak signal, shown

by the satellite number.

• (

‚1

Tracking satellite with a strong signal,

shown by the satellite number.

• (SAT): The quantity of tracking satellites.

• Altitude: The altitude of your station.

The altitude is only displayed when 4 or

more satellites are tracked. When 3 or less

satellites are tracked, “------ft” is displayed.

• Longitude/Latitude:

Longitude and Latitude of your station

position�

←Latitude

←Altitude

Sky

view

screen

North

← Untracking

satellite

← Satellite

number 30’s

signal is weak.

Elevation angle

0 degree line
Elevation angle

30 degree line

Elevation angle

60 degree line

Elevation angle

90 degree line

(Zenith)

←Longitude

←Tracking satellite quantity

Satellite

number

15’s signal

is strong�

→

About the display

Содержание ID-31A PLUS




































































































































































































































Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Icom ID-31A PLUS, Руководство для продвинутых пользователей, Страница: 77 / 227

Результаты поиска

Содержание ID-31A PLUS

Отзывы: