Icom ID-31A PLUS Скачать руководство пользователя

Страница: 149 / 227

MENU SCREEN

11-6

<<REC Start>>

MENU > Voice Memo > QSO Recorder >

<<REC Start>>

After selecting “<<REC Start>>,” push [ENT] to start

QSO recording�

•

“Recording started�” is displayed�

Information

•

BE SURE to insert a microSD card�

•

While recording, “<<REC Stop>>” is displayed on the QSO

RECORDER screen� To stop recording, select “<<REC

Stop>>�”

•

Once recording has started, the recording will continue,

even if the transceiver is turned OFF and then ON again�

Play Files

MENU > Voice Memo > QSO Recorder >

Play Files

Follow the instructions below to play back the

recorded QSO audio on the microSD card�

BE SURE to insert a microSD card�

<Playing back>

1� Select “Play Files�”

•

Displays the folders on the microSD card

These folders contain the recorded audio files.

2� Select a folder that includes an audio file to play

back�

3� Select a file to play back�

•

The VOICE PLAYER screen is displayed and the

selected file is played back.

See “The VOICE PLAYER screen description” for

forwarding or rewinding�

(p� 6-3)

NOTE:

•

The folder name is automatically created, as

shown below:

(Example)

Recording date: 31st October 2017

Folder name:

20171031

• The file name is automatically created, as shown

below:

(Example)

Recording date and time: 31st October 2017

15:30:00

File name:

20171031_153000

• The voice audio is recorded onto a microSD

card, and saved in the “wav” format� (“�wav” is not

displayed on the transceiver’s screen�)

• The recorded voice audio can also be played back

on a PC�

REC Mode

(Default: TX&RX)

MENU > Voice Memo > QSO Recorder > Recorder

Set >

REC Mode

Records both the transmit (TX) and receive (RX)

audio as the default�

•

TX&RX: Records both the transmit and receive

voice audio�

•

RX Only: Records only the receive voice audio�

TIP: When transmitted while recording

When

File Split

is set to “OFF,” the recording

is paused while transmitting. After you finish

transmitting, the recording resumes�

When

File Split

is set to “ON,” a new file is

automatically created, and the voice audio is

recorded into the new file.

( MENU > Voice Memo > QSO Recorder > Recorder

Set >

File Split

)

RX REC Condition

(Default: Squelch Auto)

MENU > Voice Memo > QSO Recorder > Recorder

Set >

RX REC Condition

Select whether or not the squelch status affects the

receive voice audio recording�

•

Always:

The transceiver always records the

receive voice audio regardless of the

squelch status�

•

Squelch Auto: The transceiver records the receive

voice audio only when a signal is

received (the squelch is opened)�

When the squelch closes while

recording, the recording will continue

for 2 seconds, and then pause�

File Split

(Default: ON)

MENU > Voice Memo > QSO Recorder > Recorder

Set >

File Split

Turn the File Split function ON or OFF�

• OFF: Once a recording starts, the transceiver

continues to record on the same file.

If the file size exceeds 2 GB, a new file is

automatically created in the same folder, and

the voice audio is recorded there�

• ON: During recording, if transmission and

reception, or squelch status (open and close)

is changed, a new file is automatically created

in the same folder, and the voice audio is

saved into a new file.

Voice Memo items (For Record/Playback)

NOTE:

The default settings shown below are for the USA transceiver version� The default settings may differ,

depending on your transceiver version� To return to your transceiver version’s default settings, see page 11-3�

Содержание ID-31A PLUS




































































































































































































































Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Похожие инструкции для ID-31A PLUS

Бренды по названию

Популярные бренды

Icom ID-31A PLUS, Руководство для продвинутых пользователей

Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Похожие инструкции для ID-31A PLUS

Бренды по названию

Популярные бренды