Icom ID-31A PLUS Скачать руководство пользователя страница 103

Страница: 103 / 227

VOICE MEMORY FUNCTION

6-4

You can change the recording setting on the MENU

screen�

See pages 11-6 and 11-7 for details.

Record only the received audio

MENU > Voice Memo > QSO Recorder > Recorder

Set >

REC Mode

The default setting is “TX&RX” (Both transmit and

receive audio are recorded).

Continue to record, even while the squelch is

closed

MENU > Voice Memo > QSO Recorder >

Recorder Set >

RX REC Condition

The default setting is “Squelch Auto” (Records only

while the squelch is open).

Record the QSO audio as one file

MENU > Voice Memo > QSO Recorder >

Recorder Set >

File Split

The default setting is “ON” (transmit and receive

audio are separately recorded in different files).

When

RX REC Condition

is set to “Squelch

Auto,” an audio file is created every time the

squelch opens. The received audio is recorded in a

separated file.

Synchronize the recording to PTT

MENU > Voice Memo > QSO Recorder >

Recorder Set >

PTT Auto REC

The default setting is “ON” (Recording is

synchronized to PTT).

TIP: When PTT Auto REC is set to “ON”

• Starts recording not only when PTT is pushed,

but also when switched to transmit by a CI-V

command or by the VOX function.

•

When

REC Mode

is set to “RX Only,” the transmit

audio is not recorded�

• A signal that is received within 10 seconds after

the squelch is closed is recorded in the same file.

Change the Skip Tire

MENU > Voice Memo > QSO Recorder > Player Set

Skip Tire

The default setting is “10sec.”

Changing the QSO recorder settings

Содержание ID-31A PLUS




































































































































































































































Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Icom ID-31A PLUS, Руководство для продвинутых пользователей, Страница: 103 / 227

Результаты поиска

Содержание ID-31A PLUS

Отзывы: