Icom IC-V80, Инструкция по эксплуатации

Страница: 39 / 59

33
Previous view
DTMF codes are used for autopatching, controlling
other equipment, and so on. The transceiver has up to
16 DTMF memory channels (d0–dF) for up to 24 digits
often-used DTMF codes.
q
Push [FUNC](
M
) , and then push [DTMF-M](0) to en-
ter the DTMF memory mode.
w
Push [
Y
] or [
Z
] to select the desired blank DTMF
memory channel.
• The selected DTMF memory channel blinks.
• If programmed, the previously programmed DTMF code
is displayed.
e
NOTE: Previously programmed code sequence in
the selected DTMF memory channel will be
cleared by following operation.
Push [FUNC](
M
) , and then hold down [DTMF-M](0) for 1
second to enter the DTMF memory programming mode.
• “_ _ _ _ _” appears.
r
Push a key to input the desired DTMF code.
• Refer to the illustration below for the DTMF code assignment.
• If a digit is mistakenly input, push [PTT] momentarily, and
then repeat from step
e
.
t
Repeat step
r
, until the desired DTMF code se-
quence (up to 24 digits) is complete.
• When the 6th character is set, the icon displays the next
blank digit group.
y
Push [PTT] to save the channel and exit the DTMF
memory programming mode.
• After the 24th digit is input, the transceiver automatically
saves the code sequence and returns to the DTMF mem-
ory mode (step
w
).
u
Push [VFO/MR/CALL] to exit the DTMF memory
mode.
Push , and then push .
(DTMF memory mode)
(DTMF memory programming mode)
Push , and then hold down for 1 second.
Push keys, until the desired DTMF code is complete.
Push [PTT] .
The next page appears when
the 6th digit has been input.
Push or to select DTMF memory channel “d3.”
[i.e.]: Programming “123456” into
the DTMF memory channel “d3.”
Push to exit the DTMF memory mode.
■
Programming a DTMF code sequence
Group Digits Icon
1st 1st to 5th No icon.
2nd 6th to 10th “ ” appears.
3rd 11th to 15th “ ” appears.
4th 16th to 20th
“ ” appears.
5th 21st to 24th
“ ” blinks.
• Programming mode indication
The programming mode consists of 5 groups.
“A”
“B”
“C”
“D”
“# (F)”
Numeric input
“ (E)”
• DTMF code assignment
DTMF MEMORY
9