Icom IC-V80, Инструкция по эксплуатации

Страница: 37 / 59

31
Previous view
D
Operation
q
Set the operating frequency, or select a memory chan-
nel or Call channel.
w
Push [FUNC](
M
) , and then push [SET](8) to enter the
Set mode.
e
Set the tone frequency, or DTCS code and DTCS po-
larity.
r
Push [# ENT] to exit the Set mode.
t
Push [FUNC](
M
) , and then push [TONE](1) several
times, until the icon of desired Tone function ap-
pears.
• “ ” : CTCSS squelch
• “
D
” : DTCS squelch
y
Operate the transceiver in a normal way; push [PTT]
to transmit, release [PTT] to receive.
u
When a signal with matched tone or code is received,
the squelch opens and audio is heard.
• To manually open the squelch, push [MONI] .
• If the signal includes an unmatched tone, the squelch
does not open. However, the icon shows the strength of
the received signal.
i
To cancel the tone or DTCS squelch, push [FUNC](
M
) ,
and then push [TONE](1) several times, until the tone
icon disappears.
✔
CONVENIENT!
Squelch burst:
While using the tone squelch, noise may be heard just
when the received signal disappears.
To eliminate the noise, the IC-U80/IC-U80E has the
Squelch Burst function.
See page 44 for details.
■
Pocket Beep function
This function uses subaudible tones for calling, and can
be used as a “common pager” to inform you that someone
has called while you were away from the transceiver.
q
Set the operating frequency, or select the memory
channel or Call channel.
w
Push [FUNC](
M
) , and then push [SET](8) to enter the
Set mode.
e
Set the tone frequency, or DTCS code and DTCS po-
larity.
r
Push [# ENT] to exit the Set mode.
t
Push [FUNC](
M
) , and then push [TONE](1) several
times, until the icon of desired Tone function and “ ”
appear.
• “ ” and “ ” : CTCSS Pocket Beep function
• “ ” and “
D
” : DTCS Pocket Beep function
y
When a signal with matched tone or code is received,
beep tones sound and “ ” blinks.
• To stop the beeps and blinking, push any key .
u
To cancel the tone or DTCS squelch, push [FUNC](
M
) ,
and then push [TONE](1) several times, until the tone
icon disappears.
Function OFF
Push , and then push to sequentially select the tone function.
Tone squelch with
pocket beep
Tone squelch
DTCS encoder (Only TX)
DTCS squelch
DTCS squelch with
pocket beep
Repeater tone
Push , and then push several times
to turn ON the Pocket Beep function.
Tone squelch with pocket beep
DTCS squelch with pocket beep
8
TONE SQUELCH AND POCKET BEEP