39
9
10
10
SET MODES
■
Set mode programming
The Set mode is used to change the settings of the trans-
ceiver
’
s functions.
D
Set mode operation
q
Push
[FUNC](
M
), and then
[SET](8) to enter the Set mode.
w
Push
[
p
] or [
q
] to select the desired item.
e
Rotate
[VOL] to select the option or value.
r
To exit the Set mode, push
[# ENT].
• Repeater tone
frequency (p.
40)
•
T
one squelch
frequency (p.
40)
• DTCS code (p.
40)
• DTCS polarity (p.
40)
•
F
requency offset (p.
41)
•
Reverse
duplex
functon
(p
.
41)
•
T
uning step (p.
41)
• Scan resume setting (p.
41)
• Function
key
timer (p.
41)
• LCD backlight (p.
42)
• TX permission (p.
42)
•
VO
X gain (p.
42)
• Microphone gain (p.
42)
•
VO
X delay (p.
43)
•
VO
X time-out timer (p.
43)
• DTMF TX key (p.
43)
• Operating mode (p. 43)
: Push
: Push
NOTE:
When the display type setting (pp. 28, 46) is set
to “CH” in the Initial Set mode, and
y
ou access the Set
mode from the memory mode, most of Set mode items
do not appear
.
1
2
4
3
5
6
7
8
11
12
14
13
15
16
17
18
19
