201802
1
BASIC MANUAL
1
PREPARATION
■
Attaching the supplied accessories
D
Battery pack
Attach (
q
→
w
) or detach the battery pack or battery case.
L
Turn OFF the receiver before attaching or detaching the
battery pack.
NOTE:
•
BE CAREFUL!
Do not break your finger nail.
• Even when the receiver is OFF, a small current still
flows in the receiver. Remove the battery pack or case
from the receiver when not using it for a long time.
Otherwise, the batteries in the pack or the case will
become exhausted.
1
2
Battery pack
(Supplied)
Latch
D
Antenna
Connect the supplied antenna to the connector.
This receiver has an SMA type antenna connector.
Antenna (Supplied)
Hold here to
tighten the
antenna screw.
D
Hand strap
R
WARNING! NEVER
swing the receiver by holding the
hand strap. This can cause injury to yourself or others.
Hand strap
(Supplied)
D
Belt clip
To attach the belt clip, slide the belt clip in the direction of
the arrow until the belt clip locks in place, and makes a
‘click’ sound.
To detach the belt clip, lift the tab up (
1
), and slide the
belt clip in the direction of the arrow (
2
).
q
w
To detach
Belt clip