Icom IC-M94DE Скачать руководство пользователя страница 76

Страница: 76 / 88

MENU SCREEN

Radio

Call Channel

You can change your Call channel. The

default setting may differ, depending on

the transceiver version.

See page 15 for details.

WX Alert

For the

USA, AUS, and EXP versions

an NOAA broadcast station transmits a

Weather Alert tone before any important

weather information.

See page 14 for details.

ON with Scan:

The preset Weather channels

are sequentially checked while

scanning.

ON: The previously selected (last used)

Weather channel is checked while

scanning.

OFF: The Weather Alert tone is not

detected.

Monitor

Hold down [VOL/SQL] for 1 second to

turn ON the Monitor function. The squelch

opens.

You can select whether the squelch closes

when you release [VOL/SQL], or when you

push any key.

Push: The squelch stays open while

holding down [VOL/SQL].

Hold: The squelch stays open until you

push any key.

Favorite CH

You can set all channels as Favorite

channels, clear all settings, or reset to

default. By default, some channels are

preset. The Favorite channels differ,

depending on the transceiver version.

See page 20 for details.

Set All Channels: Sets all channels as

Favorite channels.

Clear All Channels: Clears all Favorite

channels.

Set Default:

Resets Favorite

channels to the

default.

RT Indicator

Select whether or not to display the

Radio Telephone indicator (RT) while in

the RT mode. This indicates that while

RT is displayed, you can make a voice

communication except for a DSC call.

When “ON” is selected, “STBY” is

displayed while in the standby mode,

and “DSC” is displayed while in the DSC

mode.

ON: The RT indicator is displayed.

OFF: The RT indicator is not displayed.

Channel Display

You can select the number of digits to

display the channel number.

This setting may not be usable, depending

on the transceiver version or presetting.

3 digits: The channel number is displayed

in 3 digits, such as “01A.”

4 digits: The channel number is displayed

in 4 digits, such as “1001.”

Radio Info

[MENU] >

Radio Info

You can check your transceiver’s software

version, GPS module version, and ATIS

ID* on the “Radio Info” screen.

*For only the HOL and FRG versions.

Содержание IC-M94DE

























































































Результаты поиска

Содержание IC-M94DE

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-M94DE, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M94DE

Отзывы:

Бренды по названию

Популярные бренды