Icom iC-M605 Скачать руководство пользователя страница 98

Страница: 98 / 124

MENU ITEMS

New2001

Voice Scrambler

(Displayed only when a Voice scrambler unit is installed.)

(Radio Settings >

Voice Scrambler:

)

Set the Voice Scrambler code to between 1 and 32.

In order to understand each other, all transceivers in your

group must use the same scramble code, as well as the

same scrambler unit.

Voice Record

(Radio Settings >

Voice Record:

)

You can disable the Voice recorder (p. 70) by selecting

“Off.”

(Default: Auto (Last 120 sec))

FAV Settings

(Radio Settings >

FAV Settings

)

Set the Favorite channel settings.

• Set All Channels: Sets all channels as Favorite channels.

• Clear All Channels: Clears all Favorite channels.

• Set Default:

Returns to the default setting.

FAV on MIC

(Radio Settings >

FAV on MIC

)

Turn the FAV on MIC function ON or OFF.

• On: Pushing [

∫

] or [

√

] on the supplied microphone scrolls

up and down through only the Favorite channels.

(Default)

• Off: Pushing [

∫

] or [

√

] on the supplied microphone scrolls

up and down through all channels.

Содержание iC-M605





























































































































Результаты поиска

Содержание iC-M605

Отзывы:

Icom iC-M605, Инструкция по эксплуатации, Страница: 98 / 124

Результаты поиска

Содержание iC-M605

Отзывы: