manualshive.com logo in svg

Icom IC-M510, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-M510 Скачать руководство пользователя страница 68

55

8

AIS FUNCTION

 

D

Target/Friends List screen

The Target List screen displays up to 200 

AIS targets.

The Friends List screen displays the AIS 

targets of up to 100 targets that you set as 

a Friend. (p. 56)

The AIS target data is sorted by the 

distance from your vessel, and the closest 

target is located at the top of the list.

1

2

1

2

1 

THE NUMBER OF TARGETS

Displays the number of AIS targets.

2 

TARGET INFORMATION

Displays the following AIS target 

information.

 •

MMSI code or name

 •

Range (RNG) from your vessel to the 

target (units: NM)

 •

Bearing (BRG) from your vessel to the 

target (units: degree)

 

D

Danger list screen

The Danger List screen displays any 

Danger target whose CPA (Closest Point 

of Approach) distance and TCPA (Time to 

CPA) time are less than the set values. You 

can set the values in “CPA” and “TCPA” on 

the Menu screen. (p. 59)

[MENU] > Settings > AIS > CPA/TCPA > 

 

CPA or TCPA

 

L

The transceiver can display up to 200 

targets.

1

2

1 

THE NUMBER OF TARGETS

Displays the number of AIS targets.

2 

DANGER TARGET INFORMATION

Displays the following AIS target 

information.

 •

MMSI code or name

 •

CPA:   Closest Point of Approach 

 

(unit: NM)

 •

TCPA:  Time to CPA (units: minute)

Содержание IC-M510





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды