Icom IC-M510, Инструкция по эксплуатации

Страница: 57 / 132

44
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
■
Multiple-task mode
(For only the USA version, depending on the presetting)
If the Multiple-task function is enabled, the transceiver can hold up to 7 tasks. You can
handle more than 2 DSC tasks simultaneously by switching between the tasks. To use
the Multiple-task mode, select “Multiple” in the “Procedure” on the Menu screen. (p. 47)
[MENU] > Settings > DSC > Procedure
When the Multiple-task mode is activated, Task List is displayed on the operating screen.
NOTE: The Task mode has a Time-out Timer (TOT) function. After a certain period of
time has passed without any operation on a task, the transceiver automatically deletes
a task and returns to the operating screen.
When a Time-out Timer activates, an alarm sounds and a count down message is
displayed for 10 seconds.
D
Holding a DSC task
In the Multiple-task mode, you can hold or activate the DSC task as follows.
Example: When a Group call is received:
1. Push
Alarm OFF
to turn OFF the alarm.
•The received call’s information is displayed.
2. Push Hold .
•The received Group call task is held into the task list
and returns to the operating screen.
D
Activating the held DSC task
1. Push
Task List
to display the task list.
•The task list is displayed.
2. Select the task that you want to activate.
3. Push Active to activate the task.
•The activated task information is displayed.
4. Push [PTT] to communicate.
5. After finishing the communication, push Delete to
delete the task.