Icom IC-M510 Скачать руководство пользователя страница 52

Страница: 52 / 132

DIGITAL SELECTIVE CALLING (DSC)

Receiving a Group call or All Ships call

When a Group call is received:

•An alarm sounds.

•

“Received Group Call” is displayed.

When an All Ships call is received:

•An alarm sounds.

•

“Received All Ship Call” is displayed.

1. Push

Alarm OFF

to turn OFF the alarm.

•The channel that is assigned by the caller is

automatically selected after 10 seconds by default.

Push the Software Key below your next operation.

Ignore

Ignores the call and returns to the operating

screen.

•The call is saved in the DSC Log.

•“ ” blinks continuously until you display

the call message.

Hold

: Holds the RX call task, and returns to the

Main screen.

Pause

: Pauses the countdown until the assigned

channel is automatically selected.

•Select

Resume

to resume the countdown.

•The call is saved in the DSC Log.

Pause

is not displayed if the “CH Auto

Switch” item is set to “Manual.” (p. 46)

Accept

Accepts the call.

•The assigned channel is selected.

•The call is saved in the DSC Log.

STBY

: Closes the call, and then returns to

the operating screen.

( Example: when a Group

call is received)

Содержание IC-M510





































































































































Результаты поиска

Содержание IC-M510

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-M510, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M510

Отзывы:

Бренды по названию

Популярные бренды