manualshive.com logo in svg

Icom IC-M510, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-M510 Скачать руководство пользователя страница 27

14

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

BASIC OPERATIONS

4

 

■

  AquaQuake Water Draining function

Water in the speaker grill may muffl  e the sound coming from the speaker. The 

AquaQuake Water Draining function removes water from the speaker grill by vibrating the 

speaker cone.

CAUTION: DO NOT

 use the AquaQuake Water Draining function when an external 

speaker is connected.

1.  Push [◄] or [►] to display 

AquaQuake 

.

2. 

Hold down 

AquaQuake 

 to turn ON the function.

 •

A low frequency vibration beep sounds to drain the 

water, regardless of the volume level setting.

 

L

This function is activated for a maximum of 10 

seconds, even if you continue to hold down 

AquaQuake 

.

3.  Release the key to turn OFF the function.

 

■

 Editing  a   channel name

You can edit the name of each operating channel and weather channel, using numbers, 

uppercase letters, symbols, and a space. This enables easy recognition of the channels 

or stations. All VHF marine channels are set with default names.

1.  Push [▲] or [▼], or rotate [CH/ENT] to select the channel to edit.

2.  Push [◄] or [►] to display 

CH Name

.

 

L

 You cannot edit a channel name during Dualwatch, Tri-watch, or a scan.

3. 

Push 

CH Name

.

 •

The “Channel Name” screen is displayed.

4.  Edit the channel name.

5.  Select 

Finish

, and then push [ENT] or [CH/ENT] to 

save the edited name and return to the operating 

screen.

 TIP:

 •

Select   to enter numbers and letters, and   to enter symbols. 

 •

Select a number, character, or space using [▲], [▼], [◄], and [►].

 •

 Push [ENT] or [CH/ENT] to enter the selected number or character.

 •

 Select “←” or “→” on the screen or rotate [CH/ENT] to move the cursor, or to select 

the entered character.

Содержание IC-M510





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды