Icom IC-M510 Скачать руководство пользователя страница 18

Страница: 18 / 132

PANEL DESCRIPTION

Information area

The MMSI code* and the following indicators

are displayed in the Information area.

* ATIS code is displayed if only the ATIS

code is entered in NLD and FRG version.

Indicator

Description

Displayed when receiving a

signal or when the squelch is

open.
Displayed while transmitting.

25W

Displayed when high power is

selected.

Displayed when low power is

selected.

USA, INT,

CAN,

WX,

ATIS,

DSC

Displays the selected channel

group, INT (International), USA,

CAN (Canada), WX (Weather

channel), ATIS or DSC.

When the WX-Alert is set to

ON, “ ” is displayed.

(For only the USA version)

Displayed when the transceiver

receives valid position and time

data.

Blinks when invalid GPS data is

being received.
Displays the WLAN signal

strength while connected to a

wireless network.

•Displayed while accessing to

the optional CT-M500.

• In the Client mode,

displays the WLAN signal

strength.

Displayed when the Auto

Foghorn function is activated.

(p. 75)
Displayed when the battery

voltage is low
Displayed while accessing to

the mobile device using the

RS-M500.

The number indicates the

number of connected mobile

devices.

Displayed when there is a

target in the CPA/TCPA alarm

function.

Channel area

The selected operating channel number,

channel name, and the following indicators

are displayed in the Channel area.

Indicator

Description

Displayed when a Favorite

channel is selected.

CALL

Displayed when the Call channel

is selected by holding down

[16/C] for 1 second.

DUP

Displayed when a Duplex

channel is selected.

STBY

Displayed while in the Standby

mode.

Displayed while in the Radio

Telephone (RT) mode.

Returns to the Standby mode

if no operation occurs during

the preset period of time.

DSC

Displayed after making or

receiving a DSC call.

If the transceiver is in the

Multiple Task mode, the

number of DSC tasks is

displayed by the indicator.

Displayed when in the RX Hailer

mode. (p. 73)

SCAN

Displayed during a Priority scan.

(p. 17)

SCAN

* Displayed during a Normal scan.

(p. 17)

DUAL

Displayed during Dualwatch.

(p. 18)

TRI 16

* Displayed during Tri-watch.

(p. 18)

LOCAL

Displayed when the Attenuator

function is turned ON.

(For only the USA version.)

* Not usable in NLD version

• Displayed when there are

unread DSC messages.

•Blinks when a DSC message

is received.

Displayed when the “CH Auto

Switch” in DSC Settings is set

to an option except “Accept.”

Содержание IC-M510





































































































































Результаты поиска

Содержание IC-M510

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-M510, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M510

Отзывы:

Бренды по названию

Популярные бренды