72
8
OTHER FUNCTIONS
■
Using the RX Speaker
The RX Speaker function enables you to hear the received
audio through a PA speaker.
Connect a PA speaker as described on page 84.
q
Push [RX
] to enter the RX Speaker mode.
• The RX Speaker volume level adjustment screen is displayed.
w
Rotate Dial or push [
Y
]/[
Z
]/[
Ω
]/[
≈
] to adjust the RX
Speaker volume level, and then push [ENT].
• “RX
” is displayed.
e
Push [RX
] to return to the normal operating mode.
• “RX
” disappears.
To adjust the audio output level in the RX Speaker mode,
hold down [RX
] for 1 second to display the RX Speaker
volume level adjustment screen, and then rotate Dial. After
adjusting, push [ENT] to set it.
■
Using the PA (Public Address)
The transceiver has a PA function to make announcements
through a PA speaker.
Connect a PA speaker rated at more than 10 W at 10% distor-
tion with a 4
˘
load, as described on page 84.
• Transmitting is disabled while in the PA mode.
q
Push [PA] to enter the Public Address mode.
w
Hold down [PTT] and speak at your normal voice level.
• While holding down [PTT], the screen below is displayed.
• Rotate Dial
or
push [
Y
]/[
Z
]/[
Ω
]/[
≈
]
to adjust the PA volume level.
e
Push [EXIT] to return to normal operating screen.
While in the PA mode, the transmit and receive functions
are disabled. When the transceiver is transmitting, the PA
function is disabled.
