manualshive.com logo in svg

Icom ic-m423g, Инструкция по эксплуатации

Поделиться
Скачать
Icom ic-m423g Скачать руководство пользователя страница 2

i

PREFACE

Thank you for choosing this Icom product.
This product is designed and built with Icom’s state of the art 
technology and craftsmanship. With proper care, this product 
should provide you with years of trouble-free operation.

 

D

FEATURES

❍

 Simple operation with large keys

❍

 Easy to hear speaker

❍

 Built-in DSC meets ITU Class D requirement

❍

 Rugged waterproof construction

❍

 Optional COMMANDMIC

IV

™ (HM-195)

❍

  Easy to make an individual DSC calls using the optional 

Class B AIS Transponder

❍

 Built-in GPS (For only the IC-M423G and IC-M424G)

❍

  Built-in GPS receiver with a supplied GPS antenna  

(For only the IC-M423GE)

IMPORTANT

READ ALL INSTRUCTIONS

 carefully and completely 

before using the transceiver.

SAVE THIS INSTRUCTION MANUAL 

— This in-

struction manual contains important operating instructions 
for the transceiver.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

WARNING!

Personal injury, fire hazard or electric 
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk 
of personal injury, fire or electric shock.

CLEAN THE TRANSCEIVER AND MICROPHONE THOR-
OUGHLY WITH FRESH WATER

 after exposure to saltwa-

ter, and dry it before operating. Otherwise, the transceiver’s 
keys, switches and controllers may become unusable, due 
to salt crystallization.

Icom is not responsible for the destruction or damage to the 
Icom transceiver, if the malfunction is because of:
•  Force majeure, including, but not limited to, fires, earth-

quakes, storms, floods, lightnings, or other natural disas-
ters, disturbances, riots, war, or radioactive contamination.

•  The use of Icom transceiver with any equipment that is not 

manufactured or approved by Icom.

NOTE:

 If the transceiver’s waterproof protection appears 

defective, carefully clean it with a soft, damp (fresh water) 
cloth, then, dry it before operating.
The transceiver may lose its waterproof protection if the 
case or connector cover is cracked or broken, or the trans-
ceiver has been dropped.

Содержание ic-m423g















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды