35
4
APCO P25 MODE OPERATION
n
Pager function
D
Transmitting
This function can be used as a “message pager” to confirm
the target station of a caller’s identification, even when the
operator leaves the transceiver temporarily unattended.
If the target station is active when a signal is received, an
acknowledgement is automatically transmitted.
The calling station can verify whether a target station is ac-
tive or not.
[Digital Button] or [Digital Page] key assignment is neces-
sary to transmit the pager signal.
Not available on Non-display types.
q
Push
[Digital Button] to enter the digital call type selec-
tion mode.
For Handhelds:
For Mobiles:
PAGE
DSEL PAGE STAT
P A G E
✔
Quick access
Push
[Digital Page] to directly enter the Individual ID
selection mode. In this case, skip step
w
.
w
Push
[Digital Button] again to enter the Individual ID se-
lection mode.
• A preset ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
For Handhelds:
For Mobiles:
PAGE
INDIVIDUAL1
DSEL PAGE STAT
P A G E
I N D I V I D U A L 1
e
Push
[CH Up] or [CH Down], or rotate [CH Up/Down] to
select a desired ID (or name).
• Hold down
[Digital Button] or [Digital Page] for 1 second to
cancel and return to normal operation.
• The ID can be edited with the 10-keypad, depending on the
presetting. (10-key types only) See page 32 for editing details.
r
Push
[PTT] to transmit the pager signal to the target sta-
tion.
• The LED indicator
(for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
• “
PLEASE WAIT” is displayed.
