Icom IC-F9010 SERIES Скачать руководство пользователя

Страница: 41 / 52

APCO P25 MODE OPERATION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Emergency transmission

The P25 emergency mode can be accessed by pushng the

[Emergency]

key. An Emergency alarm s automatcally

transmtted once, or repeatedly*

, to the dspatcher (Trunkng

mode) or Talkgroup (Conventonal mode).
Moreover, whle n the emergency mode, Emergency calls
can be transmtted wth

[PTT]

to a Talkgroup.

If your transcever s programmed for Slent operaton, you
can transmt Emergency alarms and Emergency calls wthout
the beep soundng or the LCD dsplay lghtng.

[Emergency]

key assgnment s necessary to transmt the

Emergency alarm.

NOTES:

• When the Auto TX functon s pre-set, the transcever

automatcally transmts the mcrophone audo for the
specfied tme perod*

after the emergency alarm trans-

msson, even f the emergency repeat cycle s set to ‘1.’
Ask your dealer for detals.

- An HM-148G or HM-152

hand

microphone

s requred for the

moble transcevers.

• When the Auto RX functon s pre-set, the transcever

stands-by n the audble mode, for the specfied tme pe-
rod*

, after the emergency alarm transmsson.

Dependng on the emergency repeat cycle settng.

Dependng on the pre-settng. Ask your dealer for detals.

Transmitting an Emergency alarm

Push and hold

[Emergency]

for the specfied tme perod*

to enter the emergency mode.

• The countdown starts mmedately.

After the specfied tme perod*

has passed, the trans-

cever automatcally transmts an Emergency alarm once,
or repeatedly, to nform the dspatcher that the transcever
s n the emergency condton.

• To ext the emergency mode, push and hold

[Emergency]

be-

fore transmttng an Emergency alarm.

• When the emergency repeat cycle s set to ‘1,’ the transcever

transmts an Emergency alarm, exts the emergency mode and
returns to normal operaton.

• After recevng an acknowledgement, “

ACK RECEIVED

” s ds-

played (Smple and 10-key types only), and dependng on the
pre-settng, the transcever exts the emergency mode.

• When an acknowledgement s not receved, “

NO ACKNOWLDG

”

s dsplayed. (Smple and 10-key types only) And dependng on
the pre-settng, the transcever automatcally transmts the mcro-
phone audo (Auto TX).

To ext the emergency mode, turn the power OFF.

Содержание IC-F9010 SERIES





















































Результаты поиска

Содержание IC-F9010 SERIES

Отзывы:

Похожие инструкции для IC-F9010 SERIES

Бренды по названию

Популярные бренды

Icom IC-F9010 SERIES, Руководство по эксплуатации

Результаты поиска

Содержание IC-F9010 SERIES

Отзывы:

Похожие инструкции для IC-F9010 SERIES

Бренды по названию

Популярные бренды