Icom IC-F70DT, Инструкция по эксплуатации

Страница: 21 / 40

■
User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “custom-
ize” the transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q
While pushing and holding [P1]
and [P2], rotate [VOL] to turn the
power ON. Then, push and hold
[P0] to enter user set mode.
w
Push [P0] several times to select
the appropriate item. Then, push
[Up] or [Down] to set the desired
level/condition.
• Available set mode functions are
Backlight , LCD Contrast , Beep ,
Beep Level , Ringer Level , SQL
Level , AF Min Level , Mic Gain ,
Vox Gain *, Vox Delay *, Battery
Voltage , Signal Moni and System
Info .
* Appears only when the external
VOX unit is connected.
e
Rotate [VOL] to turn the power
OFF to exit set mode.
NOTE: User set mode is also
available via a programmable
key. Please refer to p. 10 [User
Set Mode]
section.
[P0]
[P1]/[P2]
[VOL]
[P0]
[Down]
[Up]
[VOL]
17
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16