7
APCO P25 MODE OPERATION
7-11
Receiving a call (Continued)
D
Receiving a Radio Inhibit call
If a Radio Inhibit is received, the transceiver will
display the
preset text (example:
“SORRY”
)
and you
cannot receive nor transmit.
When a “Decode Action” is set to “Stun”:
To use the transceiver again, do the following.
Receive an Uninhibit call.
Enter the password.
Setup again using the CS-F7500.
When a “Decode Action” is set to “Kill”:
To use the transceiver again, setup again using the
CS-F7500.
(Digital > Radio Inhibit/Uninhibit >
Decode Action
)
D
Receiving an Emergency call
1. When an Emergency call is received:
•Beeps sound.
• The preset Emergency text (example: “Emergency”)
and the calling station name (or ID) are alternately
displayed.
2. When the Send Ack function is turned ON,
the transceiver automatically transmits an
acknowledgment to the calling station.
3. Hold down [PTT] to speak.
4. To stop the beep and display indication, do the
following.
Turn OFF the transceiver
Change the channel
Push the [Back] key
D
Receiving a Phone call
1. When a Phone call is received:
•Ringers sound.
•“PHONE CALL” and “
” are displayed.
2. Hold down [PTT] to speak.
3. Release [PTT] to receive.
4. After the conversation is finished, push [Back] to
disconnect the Phone call.
