7
dPMR™ OPERATION
7-7
D
Transmitting a Message
You can transmit a message of up to 100 characters�
<Menu operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
(Menu > Signaling/Call >
Call Menu
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Signaling/Call,”
then push [OK]�
3� Push [Up] or [Down] to select “Call Menu,” then
push [OK]�
4� Push [Up] or [Down] to select an Individual or
Talkgroup ID, then push [OK]�
TIP:
About the Direct Dial function
When you select “Direct Dial” at the end of
the list, you can directly enter an Individual or
Talkgroup ID using [Up]/[Down] or Ten-key pad�
L
Push [Left]/[Right] to move the cursor and push
[Back] to delete the entered ID�
L
After entering, push [OK] to set the ID�
5� Push [Up] or [Down] to select “Message,” then
push [OK]�
(Menu > Signaling/Call >
Message
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Signaling/Call,”
then push [OK]�
3� Push [Up] or [Down] to select “Message,” then
push [OK]�
4� Push [Up] or [Down] to select a Message, then
push [PTT] to transmit it to the currently selected
target station�
L
“Success” is displayed after receiving an
acknowledgement from the target station�
L
“Failed” is displayed if the target station does not
send back an acknowledgement�
6� Push [Up] or [Down] to select a Message, then
push [PTT] to transmit it�
L
“Success” is displayed after receiving an
acknowledgement from the target station�
L
“Failed” is displayed if the target station does not
send back an acknowledgement�
Transmitting a call
