3
BASIC OPERATION
3-3
D
Selecting a Zone
Select a Zone type as shown:
Conventional, Trunking, or Voting
TIP: What is a “Zone”?
Certain channels are grouped together and assigned
to a Zone according to their intended use�
For example, Analog channels ‘Station 1’ and
‘Station 2’ are assigned to an “Analog” Zone, and
Digital channels ‘Station 3’ and ‘Station 4’ are
assigned to a “Digital” Zone�
<Key or Selector operation>
Portable:
For all types
Mobile:
For all types
z
Rotate [Selector]*� (Only the Portable type)
*When “Zone” is assigned�
z
Push [Zone Up] or [Zone Down]�
z
Push [Zone Select] to display the “Zone Select”
screen. Then, push [Up] or [Down] to select a Zone.
After selecting, push [OK].
TIP: For the Portable Non-display type
Zones and Memory channels are assigned to a
[Selector] position�
Rotate [Selector], to set the assigned Zone and
channel to be used�
<Menu operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD type
(Menu > Channel/Scan >
Zone Select
)
1� Push [Menu] to display the Menu screen�
2�
Push [Left] or [Right] to select “Channel/Scan,”
then push [OK]�
3�
Push [Up] or [Down] to select “Zone Select,” then
push [OK]�
•
Displays the “Zone Select” screen�
4�
Push [Up] or [Down] to select a Zone, then push
[OK]�
5� The selected Zone is displayed�
NOTE: For the Mobile Segment type
To select a Zone, see “Selecting a channel” as
described on page 3-4�
Selecting a Zone
