Icom IC-F5400DP Series, Руководство по эксплуатации

Страница: 17 / 189

2
PANEL DESCRIPTION
2-9
The Status indicator indicates the status of various
parameters of the transceiver as described below
(Reference: R=Red, G=Green, Y=Yellow, M=Magenta,
W=White, B=Blue)
• Programming:
Blinks while reading or writing data
• Programming Error:
Blinks if writing fails
• Channel Error:
Blinks when you select a blank channel, or an
unlocked channel
• TX low Battery 1:
Blinks while detecting a low battery in the TX mode
• TX low Battery 2:
Blinks while detecting a very low battery in the TX
mode
• TX:
Lights while transmitting
• Bell (Blink):
Blinks about twice every second
• Bell (ON):
Blinks about once every second
TIP: Depending on the “Bell” setting, the Status
indicator blinks:
• When a call that includes a matching 2-Tone
code is received
• When a call that includes a matching 5-Tone
code is received
• When an Individual or Talkgroup call is received
in the dPMR™ operaiton
• Scan, Hunt:
Blinks while scanning for a channel to search for a
signal, or while hunting for a control channel
• RX:
Lights while receiving a signal
• CH Access:
Blinks while making a call
G G G G G G G G G G G G G G G G
R G R G R G R G R G R G R G R G R G R G R G R G R G R G R G R G
R R R R R R R R R R R R R R R R Y Y Y Y Y Y Y Y
R R R R R R R R R R R R R R R R R R R R R R R R R R R R
R R R R R R R R R R R R R R R R R R R R R R R R
R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
Y Y
Y Y
G G G G
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
Y Y Y Y Y Y
Status indicator
► Continued on the next page