Icom IC-F5400DP Series Скачать руководство пользователя страница 125

Страница: 125 / 189

ABOUT THE microSD CARD

9-3

NOTE:

Use the transceiver's built-in Format function

to format all microSD cards to be used with the

transceiver. Format, even preformatted cards for

PCs or other uses. (p. 9-4)

Removing

Portable types

Push in the microSD card until a click sounds.

• The card is unlocked, and you can pull it out.

Before you remove the microSD card while the

transceiver’s power is ON, be sure to first unmount it.

(p. 9-4)

microSD
card

Transceiver

micro

Mobile types

1�

Turn OFF the transceiver.

2�

Turn the transceiver upside down.

3�

Push the locking tab using a solid tool, such as a

flat-bladed screwdriver (

), then detach the front

panel (

Front panel

4� Turn the transceiver right-side up�

5�

Insert the card into the slot until it locks in place,

and makes a ‘click’ sound.

• The SD card icon is displayed when the microSD card

is inserted�

Be sure to check the card orientation�

Transceiver

microSD

card

microSD

card

micro

Card orientation

Top

Bottom

Front

Rear

6�

Attach the front panel, then turn ON the transceiver.

Inserting

Portable types

Insert the card into the slot until it locks in place, until

it makes a ‘click’ sound.

• The SD card icon is displayed when the microSD card is

inserted�

Be sure to check the card orientation�

Card orientation

Top

Bottom

Front

Rear

Mobile types

1�

Detach the front panel, as described to the left.

2�

Push in the microSD card until it makes a click

sound�

• The card is unlocked, and you can pull it out.

Before you remove the microSD card while the

transceiver’s power is ON, be sure to first unmount

it. (p. 9-4)

Transceiver

Top

Bottom

Front

Rear

Transceiver

microSD card

Inserting or removing the microSD card

Содержание IC-F5400DP Series






























































































































































































Результаты поиска

Содержание IC-F5400DP Series

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-F5400DP Series, Руководство по эксплуатации

Результаты поиска

Содержание IC-F5400DP Series

Отзывы:

Бренды по названию

Популярные бренды