10
3
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Transmitting a call
IDAS operation allows you to make a call to a specific station
(Individual call) or to a specific group (Talkgroup call). Other
digital mode transceivers on the channel will not hear a call
that does not match their Individual or Talkgroup ID and/or
RAN (Radio Access Number) code.
D
Transmitting a Voice Call
q
Push [Digital Button] to enter the application selection
mode.
• “VOICE” appears.
• To change to the desired call type, hold down [Digital Button] for
1 second while in standby. After changing, the transceiver auto-
matically enters the application selection mode.
* This illustration shows an Individual type call.
w
Push [Digital Button] again to enter the Individual or Talk-
group ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, ID code is displayed.
• The primary ID can be preset to display first.
• When you want to make a voice call to all transceivers within
the communication range, use the ‘All Call’ function; select the
Talkgroup ID code “65535.”
e
Push [CH Up] or [CH Down] to select a desired an ID name
or ID code.
Individual or Talkgroup
ID name is displayed.
r
Hold down [PTT], then speak into the microphone.
t
Release [PTT] to receive.