7
NXDN™ OPERATION
7-7
Transmitting a call (Continued)
D
Transmitting a Message
You can transmit a message of up to 100 characters.
<Menu operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
(Menu > Signaling/Call >
Call Menu
)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Call Menu,” then
push [OK].
4. Push [Up] or [Down] to select the Individual or
Group ID, then push [OK].
5. Push [Up] or [Down] to select “Message,” then
push [OK].
(Menu > Signaling/Call >
Message
)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Message,” then
push [OK].
4. Push [Up] or [Down] to select a Message, then
push [PTT] to transmit it to the currently selected
destination.
L
“Success” is displayed after receiving an
acknowledgement from the target station.
L
“Failed” is displayed if the target station does not
send back an acknowledgement.
6. Push [Up] or [Down] to select a Message, then
push [PTT] to transmit it.
L
“Success” is displayed after receiving an
acknowledgement from the target station.
L
“Failed” is displayed if the target station does not
send back an acknowledgement.
Previous view
