Icom ic-F3162T/S, Инструкция по эксплуатации

Страница: 21 / 40

16
3
BASIC OPERATION
■
User set mode
You can “customize” the transceiver operation to suit your pref-
erences and operating style.
Entering the user set mode:
q
Hold down [User Set Mode] for 1 second to enter the user
set mode.
w
Push [User Set Mode] one or more times to select the ap-
propriate item. Then push [CH Up] or [CH Down] to set the
desired level or condition.
• In the user set mode, the selectable items are preset by your
dealer. The presetable items are
Backlight, LCD contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, Signal
Moni, Lone Worker and System Info.
* Appear only when the external VOX unit is connected.
e
Hold down [User Set Mode] for 1 second again to exit the
set mode.
■
Scrambler function
The voice scrambler function provides private communication
between stations. All versions have a built-in frequency inver-
sion type scrambler; however, an optional rolling or non-rolling
type is available as well.
➥
Push [Scrambler] to toggle the scrambler function ON or OFF.
• “ ” (Scrambler indicator) appears when the function is ON.
■
Stun function
When the specified ID, set as a stun ID or kill ID, is received,
the stun function is activated.
When the stun ID is received, the transceiver becomes unus-
able. Entering of the password (p. 11) or receiving a specified
ID, set as a revive ID, is necessary to operate the transceiver
again in this case.
When the kill ID is received, the transceiver switches to the
cloning required condition. Cloning the transceiver is neces-
sary to operate the transceiver again in this case.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16