28
6
BATTERY CASE
■
Optional battery case (BP-240)
When using the optional battery case, install 6
×
AAA (LR03) size
alkaline batteries as illustrated at right.
q
Unhook the battery cover release hook (
q
), and open the cover
in the direction of the arrow (
w
). (Fig.1)
w
Then, install 6
×
AAA (LR03) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
e
Fit the cover in the direction of the arrow (
e
), then close (
r
).
Hook the battery cover release hook until it makes a ‘click’
sound (
t
).
(Fig.3)
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old batter-
ies together.
• Keep battery contacts clean. It’s a good idea to clean battery
terminals once a week.
• Never incinerate used battery cells since internal battery gas
may cause them to rupture.
• Never expose a detached battery case to water. If the battery
case gets wet, be sure to wipe it dry before using it.
NOTE:
When the optional battery case is attached, the battery
type must be selected to “Alkaline battery operation” when turn-
ing the transceiver ON. Ask your dealer for details.
