Icom IC-905 Скачать руководство пользователя

Страница: 18 / 96

1-5

BASIC MANUAL

PANEL DESCRIPTION

Touch screen display

TX STATUS INDICATOR

Displays the transmit status.

•

is displayed while transmitting.

•

(with a dotted line) is displayed when the

selected frequency is outside of the band edge

frequency range. (p. 3-6)

• Displayed in orange when the transceiver is in

the Terminal mode.

•

(Grayed out) is displayed when

transmission is inhibited.

• In the DD mode,

is displayed when “TX

INHIBIT” is set to ON.

LMT ICON

Displayed if the power amplifi er temperature

becomes extremely high, and the Protection

function is activated after transmitting continuously

for a long period of time.

INTERNAL GATEWAY

Displays the communication status while using the

Internal Gateway function.

USB CONNECTION INDICATOR

Displayed when an external USB device is

connected through a USB cable.

M1~M8/T1~T8 ICONS

• “M1” ~ “M8” is displayed when “External Keypad”

on the CONNECTORS screen is set to “ON,” and

you are using the Memory Keyer function.

• “T1” ~ “T8” is displayed when using the Voice TX

memory.

PICTURE SHARE ICON

Displayed when the Share Pictures function is ON.

GPS ICON (p. 7-1)

Displays the status of the GPS receiver.

Touch the icon to display the GPS INFORMATION

screen.

GPS ALARM ICON

Displayed when the GPS Alarm function is ON.

NETWORK CONTROL ICON

Displayed while accessing the transceiver using the

optional RS-BA1 (compatible in the near future), for

Remote control operation.

VOICE RECORDER ICONS

Displayed while recording or pausing using the

Voice recorder.

SD CARD ICON (p. 6-1)

Displayed when an SD card is inserted, and blinks

while accessing the card.

CLOCK READOUT (p. 9-1)

Displays the current local time.

Touch the readout to display both the current local

time and UTC time.

FUNCTION INDICATOR FOR MULTI-FUNCTION

CONTROL

(p. 1-8)

Displays the function that is assigned to

RIT/

∂

TX ICON

Displayed when the Receive Increment Tuning

(RIT) (p. 4-2) or

∂

TX function is ON.

RIT/

∂

TX/SPLIT/DUPLEX FREQUENCY

READOUT

•

Displays the shift oﬀ set frequency for the RIT or

∂

TX functions.

• Displays the shift frequency for the Duplex

function or the split frequency.

AFC/ ¹⁄4 ICON (pp. 4-3, 3-4)

Displayed while the Auto Frequency Control (AFC)

function or the 1/4 Tuning function is ON.

6 7 8 9

Содержание IC-905

































































































Результаты поиска

Содержание IC-905

Отзывы:

Похожие инструкции для IC-905

Бренды по названию

Популярные бренды

Icom IC-905, Основное руководство

Результаты поиска

Содержание IC-905

Отзывы:

Похожие инструкции для IC-905

Бренды по названию

Популярные бренды