8
OTHER FUNCTIONS
8-5
NTP function
The Network Time Protocol (NTP) function
synchronizes the internal clock of the IC-905 with a
time management server�
L
To use this function, an Internet connection and default
gateway settings are necessary�
D
Manually synchronizing the internal
clock
Using this function, you can manually synchronize
the internal clock by accessing a time management
server�
1� Open the DATE/TIME screen�
» SET > Time Set >
Date/Time
2� Touch “<<NTP TIME SYNC>>�”
• “NTP Time Sync� Please wait���” is displayed�
• The transceiver starts accessing the NTP server
address that is set in “NTP Server Address�”
3� When “Time Sync completed�” is displayed, touch
[OK]�
4� To close the DATE/TIME screen, push
several times�
D
Using the NTP function
By turning ON the NTP function, the transceiver
automatically synchronizes the internal clock with the
time management server�
L
This function is set to ON by default�
1� Open the DATE/TIME screen�
» SET > Time Set >
Date/Time
2� Touch “NTP Function�”
3� Select ON or OFF�
• When ON is selected, the transceiver starts
accessing the NTP server address that is set in “NTP
Server Address�”
4� To close the DATE/TIME screen, push
several times�
Содержание IC-905
Страница 204: ...14 1 Section 14 Cloning 14 2 Touch Screen Calibration function 14 4 MAINTENANCE ADVANCED ...
Страница 213: ...16 1 Section 16 FSK and AFSK connections 16 2 ADVANCED CONNECTIONS ...
Страница 215: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan A7711 8EX 2023 Icom Inc Mar 2023 How the World Communicates ...