Icom IC-905 Скачать руководство пользователя страница 39

Страница: 39 / 215

VOICE RECORDER FUNCTIONS

4-2

Recording a QSO audio

This transceiver is equipped with a QSO recorder not

only for the receive audio but also for the transmit

audio�

This function is useful to make a QSO record, or

to confirm your QSO with a rare entity’s station, or

on a DX’pedition. You can also use the function to

repeatedly transmit the same voice message.

The recorded contents are saved onto an SD card�

There are 2 ways to start recording.

�

Push

and touch “<<REC Start>>�”

�

Push

and touch [RECORD]�

The recorded audio is saved in the “Voice” folder on the

SD card�

When “PTT Auto REC” is set to ON, the recording

automatically starts when you start transmitting.

» RECORD > Recorder Set >

PTT Auto REC

TIP: About the icons

•

While recording, “

�

” is displayed and the SD card icon

next to the clock blinks blue�

“

�

” is displayed�

The SD card icon blinks�

•

While pausing, “

〓

” is displayed�

“

〓

” is displayed�

NOTE:

•

To record a QSO, an SD card (user supplied) is

required�

•

DO NOT

remove the SD card from the transceiver while

recording. Otherwise, the recording stops, and the card

data may be corrupted or deleted.

•

Once the recording starts, it pauses and resumes if the

transceiver is turned OFF and ON again�

•

The recording continues until you touch <<REC Stop>>,

or the free space on the SD card has run out�

•

When the recording file’s content becomes 2 GB, the

transceiver continues to record, but to a new file.

Quick recording

You can quickly record the received audio�

1� Push

�

• Opens the QUICK MENU screen�

2� Touch “<<REC Start>>�”

• Starts recording�

•

“Recording started.” is briefly displayed.

To stop recording, open the QUICK MENU screen

again and touch “<<REC Stop>>�”

Basic recording

You can record both receive and transmit audio.

1� Open the QSO RECORDER screen�

RECORD

2� Touch “<<REC Start>>�”

• Starts recording�

•

“Recording started.” is briefly displayed.

To stop recording, touch “<<REC Stop>>.”

3�

To close the QSO RECORDER screen, push

�

Содержание IC-905
























































































































































































































Результаты поиска

Содержание IC-905

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-905, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-905

Отзывы:

Бренды по названию

Популярные бренды