Icom IC-905 Скачать руководство пользователя страница 108

Страница: 108 / 215

GPS OPERATION (ADVANCED)

9-31

GPS SET

Data Extension

(Default: OFF)

Selects whether or not to transmit the Course/Speed

data or the Power/Hight/Gain/Directivity data with the

position data in the D-PRS mode.

The number of characters you can enter in “Comment”

differs, depending on the “Altitude” and “Data Extension”

settings.

•

OFF: Does not transmit any information.

•

Course/Speed:

Transmits the course and speed data with the

position data�

•

Power/Height/Gain/Directivity:

Transmits the TX power level, height, antenna

gain, and antenna direction, along with the

position data�

Course

(Default: 0º)

Sets the Object’s course to between 0º and 360º.

This item is displayed when “Data Extension” is set to

“Course/Speed.”

Speed

(Default: 0mph)

Sets the Object’s speed to between 0 and 1150 mph.*

* If the Speed unit is set to “km/h,” set to between 0 to 1850

km/h, or set to “knots,” set to between 0 and 999 knots.

This item is displayed when “Data Extension” is set to

“Course/Speed.”

Power

(Default: 0W)

Selects the TX power level of Object, to transmit along

with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select 0, 1, 4, 9, 16, 25, 36, 49, 64, or 81 W.

Height

(Default: 10ft)

Selects the height of the Object’s antenna, to transmit

along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select 10, 20, 40, 80, 160, 320, 640, 1280, 2560, or

5120 feet�*

* If the Altitude/Distance unit is set to “m,” select 3, 6, 12, 24,

49, 98, 195, 390, 780, or 1561 meters�

Gain

(Default: 0dB)

Selects the gain of the Object’s antenna, to transmit

along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select between 0 and 9 dB.

Directivity

(Default: Omni)

Selects the direction the Object’s antenna was

pointing, to transmit along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select Omni, 45º NE, 90º E, 135º SE, 180ºS, 225º

SW, 270º W, 315º NW, or 360º N�

SSID

(Default: ---)

Selects an SSID based on APRS

to add to your call

sign, to show your operating style to other stations.

The additional methods of the SSID differ, depending

on whether the call sign includes a space or not.

See page 9-28 for details of the SSID.

•

---:

The space in call sign is converted to “-.”

•

(-0):

No SSID is added.

•

-1 ~ -15: Adds an SSID of -1 to -15 to your call sign.

•

-A ~ -Z: Adds an SSID of -A to -Z to your call sign.

Time Stamp

(Default: DHM)

Selects the transmitting time stamp type.

The time stamp is transmitted with the position

data in the D-PRS mode, and UTC (Universal Time

Coordinated) time is used.

•

DHM: Transmits the time stamp in the Day, Hour,

and Minute format.

•

HMS: Transmits the time stamp in the Hour, Minute,

and Second format.

Содержание IC-905
























































































































































































































Результаты поиска

Содержание IC-905

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-905, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-905

Отзывы:

Бренды по названию

Популярные бренды