Icom IC-905 Скачать руководство пользователя страница 106

Страница: 106 / 215

GPS OPERATION (ADVANCED)

9-29

GPS SET

Comment

Enter a comment to transmit it with the D-PRS

position data. You can enter up to four comments.

The number of characters you can enter differs,

depending on the Data Extension and Altitude settings.

Data Extension

Altitude

Characters

entered

(maximum)

OFF

43 (Default)

OFF

Course/Speed

OFF

Course/Speed

Power/Height/Gain/Directivity

OFF

Power/Height/Gain/Directivity

The symbol “ ” displays the transmittable comment

range. Please note that the characters that exceed the

range will not be transmitted.

Transmittable comment range display

(Example: up to 28 characters)

Time Stamp

(Default: OFF)

Selects the transmitting time stamp type.

The time stamp is transmitted with the position

data in the D-PRS mode, and UTC (Universal Time

Coordinated) time is used.

When your position is manually set, time stamp data is

not transmitted�

•

OFF: Does not transmit the time information.

•

DHM: Transmits the time stamp in the Day, Hour,

and Minute format.

•

HMS: Transmits the time stamp in the Hour, Minute,

and Second format.

Altitude

(Default: OFF)

Selects whether or not to transmit altitude data with

the position data in the D-PRS mode.

The number of characters you can enter in “Comment”

differs, depending on the “Altitude” and “Data Extension”

settings.

•

OFF: No altitude data is transmitted.

•

ON: Transmits altitude data with position data.

Data Extension

(Default: OFF)

Selects whether or not to transmit the Course/Speed

data or the Power/Hight/Gain/Directivity data with the

position data in the D-PRS mode.

The number of characters you can enter in “Comment” differs,

depending on the “Altitude” and “Data Extension” settings.

•

OFF: Does not transmit any information.

•

Course/Speed:

Transmits the course and speed data with the

position data�

The course and speed data are not transmitted

when your location is manually set.

When transmitting with this setting, your station

is regarded as a mobile station.

•

Power/Height/Gain/Directivity:

Transmits the TX power level, height, antenna

gain, and antenna direction, along with the

position data�

The Power, Height, Gain, and Directivity data are

transmitted even if your location is manually set.

When transmitting with this setting, your station

is regarded as a base station.

Power

(Default: 0W)

Selects the TX power level of the base station, to

transmit along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select 0, 1, 4, 9, 16, 25, 36, 49, 64, or 81 W.

Height

(Default: 10ft)

Selects the height of the base station’s antenna, to

transmit along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select 10, 20, 40, 80, 160, 320, 640, 1280, 2560, or

5120 feet�*

* If the Altitude/Distance unit is set to “m,” select 3, 6, 12, 24,

49, 98, 195, 390, 780, or 1561 meters�

Gain

(Default: 0dB)

Selects the gain of the base station’s antenna, to

transmit along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select between 0 and 9 dB.

Directivity

(Default: Omni)

Selects the direction the base station’s antenna was

pointing, to transmit along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

•

Select Omni, 45º NE, 90º E, 135º SE, 180ºS, 225º

SW, 270º W, 315º NW, or 360º N�

Содержание IC-905
























































































































































































































Результаты поиска

Содержание IC-905

Отзывы:

Icom IC-905, Руководство для продвинутых пользователей, Страница: 106 / 215

Результаты поиска

Содержание IC-905

Отзывы: