Icom iC-7850 Скачать руководство пользователя страница 99

Страница: 99 / 282

5-22

RECEIVE AND TRANSMIT

Operating RTTY (FSK) (Continued)

■

RTTY decode set mode

This Set mode is used to set the decode USOS func-
tion, time stamp setting, and other RTTY settings.

Display the RTTY decode screen, then push
[<MENU1>](F).

DECODE

[F-3]



<MENU1>

[F-1]



Displays <MENU2>

• The function menu changes to Menu 2.

Push [SET](F).

• The RTTY decode set screen is displayed.

Push [

](F) or [

](F) to select the desired item.

Rotate [MAIN DIAL] to select the desired setting.

• Hold down [DEF](F) for 1 second to select the default

setting.

• Push [

](F) to select the set contents for some

items.

Push [EXIT/SET].

• Exits the Set screen.

RTTY FFT Scope Averaging

(Default: OFF)

Sets the FFT scope waveform averaging function from
2 to 4 or OFF.

Recommendation!

Use the default or smaller number FFT scope wave-
form setting for tuning.

RTTY FFT Scope Waveform Color

(Default: (R) 51 (G) 153 (B) 255)

Sets the color of the FFT scope waveform.

• The color is set in the RGB format.
• Push [

](

)

to select R (Red), G (Green) and B

(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.

• The color is displayed in the box beside the RGB

scale.

RTTY Decode USOS

(Default: ON)

Turns the letter code decoding capability ON or OFF
after receiving a “space.”
(USOS: UnShift On Space function)

• ON:

Decodes as a letter code.

• OFF: Decodes as a character code.

RTTY Decode New Line Code

(Default: CR,LF,CR+LF)

Selects the internal RTTY decoder new line code.
CR: Carriage Return, LF: Line Feed

• CR,LF,CR+LF: Makes new line with any codes.
• CR+LF: Makes new line with CR+LF code

only.

RTTY Diddle

(Default: BLANK)

Selects the diddle status.

• BLANK: Transmits blank code during no code trans

mission.

• LTRS: Transmits letter code during no code trans

mission.

• OFF: Turns the diddle function OFF.

RTTY TX USOS

(Default: ON)

Explicitly inserts the FIGS character, even though it is
not required by the receiving station.

• ON: Inserts FIGS.
• OFF: Does not insert FIGS.

• RTTY

decode

set screen

[EXIT/SET] [MAIN DIAL]

(F) Function keys

•

Fucntion menu (MENU2)

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды