Icom iC-7850 Скачать руководство пользователя страница 91

Страница: 91 / 282

5-14

RECEIVE AND TRANSMIT

■

Operating RTTY (FSK)

A DSP-based high-quality Baudot RTTY encoder/de-
coder is built-in to the

IC-7850

. When connecting a PC

keyboard, you can operates RTTY without an external
RTTY terminal or PC.

If you would rather use your RTTY terminal, consult
the equipment manual.

Before transmitting, monitor your selected operating
frequency to make sure you don’t cause interference
to other stations on the same frequency.



Connect a keyboard to the [USB A] port on the rear

panel:



The Multi-function screens are OFF:

Push a band key to select a desired band.

Push the Mode key [RTTY/PSK] to select the RTTY

mode.

• After the RTTY mode is selected, hold down [RTTY/PSK] for

1 second to toggle between the RTTY and RTTY-R modes.

• “RTTY” or “RTTY-R” is displayed.

Push [DECODE](F).

• The RTTY decode screen is displayed.

Rotate [MAIN DIAL] to tune a desired signal.

• Aim for a symmetrical wave form, and ensure the peak

points align with the mark (2125 Hz) and shift (170 Hz)
frequency lines in the FFT scope.

Rotate [RF PWR] to adjust the output power.

• The TX power readout displays the setting level.

Push the Multi-function [METER](



) key to select

the Po meter.

Push [F12] on the keyboard to transmit.

• The [TX] indicator lights red.

Type on the keyboard to enter the contents that you

want to transmit.

• The typewritten contents are displayed in the TX buffer

screen and immediately transmitted.

• The text color will be changed when transmitted.
• Push one of [F1]–[F8] to transmit the TX memory con

tents.

Push [F12] on the keyboard to return to receive.

Mode icon

TX power readout

FFT Scope

Waterfall

• Waterfall display

Mode keys

[MAIN DIAL]

(



) Multi-function keys

[RF PWR]

TX indicator

MAIN

Band keys

✔

For your convenience

The desired text can be typed before being transmitted.

Do steps

above.

Type on the keyboard to enter the message that you

want to transmit.

• The typewritten contents are displayed in the TX buffer

screen.

Push [F12] on the keyboard to transmit the typewrit-

ten contents.

• The color of displayed text in the TX buffer screen, will

change when transmitted.

• To cancel the transmission, push [F12] twice.

Push [F12] on the keyboard to return to receive.

✔

For your convenience

When an external keypad is connected, the preset con-
tents, RT1 ~ RT4 or RT5 ~ RT8, can be transmitted.
See

pages 3-6 and 15-16

for details.

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды