Icom iC-7850 Скачать руководство пользователя

Страница: 90 / 282

5-13

RECEIVE AND TRANSMIT

Keyer set mode

This Set mode is used to set the memory keyer repeat
time, dash weight, paddle specifications, keyer type,
and so on.

• Setting contents



The Multi-function screens are OFF:

Push [KEYER](F).

• The Memory keyer screen is displayed.

Display the Memory keyer menu screen, then push

[CW KEY](F).

[EXIT/SET]



CW KEY

[F-4]

• The

Keyer CW-Key screen

is displayed.

Push [

](F) or [

](F) to select the item.

Rotate [MAIN DIAL] to set the desired setting.

• Hold down [DEF](F) for 1 second to select the default

setting.

Push [EXIT/SET].

• Exits the

Keyer CW-Key screen

•

Keyer CW-Key screen

Keyer

Repeat Time

(Default: 2s)

When sending CW using the repeat timer, set the time
between transmission.

• Selectable time: 1 ~ 60 seconds in 1 second steps.

Dot/Dash Ratio

(Default: 1:1:3.0)

Sets the dot/dash ratio.

• Selectable ratio: 1:1:2.8 ~ 1:1:4.5 in 0.1 steps.

Keying weight example:

Morse code “K”

DASH

Weight setting:
1:1:3 (default)

Weight setting:
Adjusted

DASH

DOT (fixed*)

Adjustable range

SPACE (fixed*)

*SPACE and DOT length can be
adjusted only with [KEY SPEED].

Rise Time

(Default: 4ms)

Sets the rise time of the transmitted CW envelope.

• Selectable time: 2, 4, 6 or 8 milliseconds.

Key action

Tx output power

• About rise time

Rise time

Set Tx power level

Time

Paddle Polarity

(Default: NORMAL)

Sets the paddle polarity.

• Normal:

Right – Dash, Left – Dot.

• Reverse: Right – Dot , Left – Dash.

Keyer Type

(Default: ELEC-KEY)

Selects the keyer type for the [ELEC-KEY] connector
on the front panel.

• Selectable key: Straight, BUG-KEY, or ELEC-KEY.

MIC Up/Down Keyer

(Default: OFF)

Sets the microphone [UP]/[DN] switches to be used
as a key. (The microphone [UP]/[DN] switches do not
work as a “squeeze key.”)

• ON: The [UP]/[DN] switches can be used as a key

for CW.

• OFF: The [UP]/[DN] switches cannot be used as a

key for CW.

NOTE:

When “ON” is selected, the frequency and

the Memory channels cannot be changed using the
[UP]/[DN] switches.

[EXIT/SET]

(F) Function keys

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды