Icom iC-7850 Скачать руководство пользователя

Страница: 89 / 282

5-12

RECEIVE AND TRANSMIT

Electronic keyer functions (Continued)

■

Contest number set mode

This mode is used to set the Number style, Count up
trigger and Present number.

• Setting contents



The Multi-function screens are OFF:

Push [KEYER](F).

• The Memory keyer screen is displayed.

Display the Memory keyer menu screen, then push

[001](F).

[EXIT/SET]



001

[F-3]

• The Keyer 001 screen is displayed.

Push [

](F) or [

](F) to select the item.

Rotate [MAIN DIAL] to set the desired setting.

• Hold down [DEF](F) for 1 second to select the default

setting.

Push [EXIT/SET].

Exits the Keyer 001 screen.

•

Keyer 001 screen

Number Style

(Default: Normal)

This item sets the numbering system used for contest
(serial) numbers— normal or short morse numbers.

• Normal:

Does not use short morse numbers

• 190

➔

ANO:

Sets 1 as A, 9 as N and 0 as O.

• 190

➔

ANT:

Sets 1 as A, 9 as N and 0 as T.

• 90

➔

NO:

Sets 9 as N and 0 as O.

• 90

➔

NT:

Sets 9 as N and 0 as T.

Count Up Trigger

(Default: M2)

This selects which of the four memories will contain
the contest serial number exchange. The count up trig-
ger allows the serial number to be automatically incre-
mented after each complete serial number exchange
is sent.

• Selectable memory: M1 ~ M8.

Present Number

(Default: 001)

This item shows the current number for the count-up
trigger channel set above.

• Rotate [MAIN DIAL] to change the number (001 ~

9999), or hold down [001CLR](F) for 1 second to re-
set the current number to 001.

[EXIT/SET]

(F) Function keys

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды