Icom iC-7850 Скачать руководство пользователя страница 230

Страница: 230 / 282

15-19

SET MODE

■

Others set screen (continued)

USB Keying (CW)

(Default: OFF)

You can control to transmit, receive and keying from
the PC, through the USB port.

Select the control port to be used for communication
between the IC-7850 and PC, according to the operat-
ing condition.

• OFF: Turn OFF the function.
• USB1 DTR: Use the DTR terminal on the CI-V

(PC) side.

• USB1 RTS: Use the RTS terminal on the CI-V

(PC) side.

• USB2 DTR: Use the DTR terminal on the DECODE

(IC-7850) side.

• USB2 RTS: Use the RTS terminal on the DECODE

(IC-7850) side.

You cannot select the terminal which is already se-

lected in the [USB SEND] item or [USB Keying
(RTTY)].

USB Keying (RTTY)

(Default: OFF)

You can control to transmit, receive and RTTY (FSK)
from the PC, through the USB port.

Select the control port to be used for communication
between the IC-7850 and PC, according to the operat-
ing condition.

• OFF: Turn OFF the function.
• USB1 DTR: Use the DTR terminal on the CI-V

side.

• USB1 RTS: Use the RTS terminal on the CI-V

side.

• USB2 DTR: Use the DTR terminal on the DECODE

side.

• USB2 RTS: Use the RTS terminal on the DECODE

side.

You cannot select the terminal which is already se-

lected in the [USB SEND] item or [USB Keying
(CW)].

Keyboard Type

(Default: Japanese)

Selects the connected keyboard type.

• Options: English, Japanese, United Kingdom, French,

French(Canadian), German, Portuguese,
Portuguese (Brazilian), Spanish, Spanish
(Latin American), Italian

Keyboard Repeat Delay

(Default: 250ms)

Sets the repeat delay time of the keyboard.

• Options: 100 ms–1000 ms (in 50 ms steps)

Keyboard Repeat Rate

(Default: 10.9cps)

Sets the repeat rate of the keyboard.

• Range: 2.0cps–30.0cps

Mouse Pointer Speed

(Default: MID)

Selects the mouse pointer speed.

• Options: SLOW, MID, FAST

Mouse Pointer Acceleration

(Default: ON)

Turns the mouse pointer acceleration ON or OFF.

• OFF: Turn OFF the function.
• ON: Turn ON the function.

DHCP (Valid after Reboot)

(Default: ON)

Turns the DHCP function ON or OFF.

• OFF: Uses the static IP address.
• ON: Uses the DHCP function.

If a DHCP server is in your network envi-

ronment, the IP address is automatically
obtained.

This setting takes effect after reboot.

IP Address (Valid after Reboot)

(Default: 192.168. 0. 10)

Sets the static IP address.

Push [

](F) to select the item, and then turn

[MAIN DIAL] to set the address.

This setting is valid when "OFF" is selected the

[DHCP (Valid after Reboot)] item.

This setting takes effect after reboot.

Subnet Mask (Valid after Reboot)

(Default: 255.255.255.0 (24bit))

Sets the subnet mask to connect to your PC or LAN
(Local Area Network), through the Ethernet.

Push [

](F) to select the item, and then turn

[MAIN DIAL] to set the address.

This setting is valid when "OFF" is selected the

[DHCP (Valid after Reboot)] item.

This setting takes effect after reboot.

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды